Question about 2009 Mazda Tribute 3.0

Open Question

Where is the blower motor resistor for a 2010 mazda tribute

My blower motor works only at higher speeds so is the problem the resistor?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: where is the blower motor resistor on a 2002 mazda protege?

just remove the glove box and its right behind it just take the white pug out and the two phillips screws to remove the resistor out, replace with the new one and cool off!!!! Hope this helps

Posted on Aug 04, 2009

teemossinmia
  • 265 Answers

SOURCE: 2001 Mazda Tribute (3.0 L) Heater motor functions on high only

Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

Posted on Jan 19, 2010

  • 978 Answers

SOURCE: why would the starter motor

it can happen on any new machine but if car was not abused in any way should be covered under warranty

Posted on Mar 29, 2011

Testimonial: "Thanks for replying. I'll know tomorrow if they're going to try and charge me anything for this. I have the vehicle 7 months. Warranty should cover"

  • 13 Answers

SOURCE: mazda bravo 2.5TD blower fan only works on speeds 3 and 4. Is it the resistor or the fan motor

ballast resistor for sure as this lowers out put to blower motor and increases power as your select a faster setting balast resistor shoud be located on motor or near by hope this helps phil

Posted on Aug 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the resister located


on the firewall close to the blower motor usually

Feb 29, 2016 | 2010 Ford F-150

2 Answers

Blower motor not working on 4 1998 Mazda protege


check for power and ground at the blower motor. if this is good then hit motor. if it starts the motor needs replacing. then check the fuse then the fan speed switch for power and ground going to the switch and coming out of switch.

Jul 28, 2015 | 1998 Mazda Protege

1 Answer

2002 grand caravan blower motor intermittent replaced resistor


in review
the fan speed resistor is new
you bench tested the blower motor
12 volts test ..only runs it at full speed
if cabin filer want changed the blower motor would run hotter

could be the motor brushes or bush/motor bearing when slowed
you might want to inspect the brushes and clean the dust out of the motor
if no better
does that have climate control ?
might be the fan switch itself or the earth isnt so good

pm9193-front-vpok4bnazo4imyyhqje4rxo2-4-0.jpg

images-vpok4bnazo4imyyhqje4rxo2-4-1.jpg

Apr 01, 2017 | 2000 Dodge Grand Caravan

2 Answers

My blower motor works sometimes, but sometimes not. It seems to work better if I am at higher speeds for a while. Is this most likely a blower motor or resister issue?


bet on the motor on this one,sounds worn,at higher speeds the vibration can help the brushes in the blower motor work better.
you can test my theroy by giving the blower mortor a sharp tap while its running to see if it increases in speed.
if it does then you have your answer.
the brushes in the blower motor build up carbon deposits over time and cause the motor to slow down.by tapping the motor the deposits release and allow the current to flow more freeley.
good luck,Gary

Oct 24, 2013 | 2001 Mazda 626

1 Answer

Mazda bravo 2.5TD blower fan only works on speeds 3 and 4. Is it the resistor or the fan motor


ballast resistor for sure as this lowers out put to blower motor and increases power as your select a faster setting balast resistor shoud be located on motor or near by hope this helps phil

Aug 16, 2012 | 1998 Mazda B-Series

1 Answer

A/c and heater fan runs on speeds 3,4,5 but not on 1,and 2 how do i replace the switch and if so how do i get to it? is the switch really the problem?


Sounds like a blower motor resistor and not the switch. The resistor is mounted near the blower motor. the resistor has four resistors in it that drop the voltage to control the blower speed. It sounds like the resistor for speed 2 has burned out. This resistor is used by speed two and by speed one. If it burns out speed one will not work also. Since the higher speeds do not need the speed 2 resistor they continue to work.

Oct 04, 2010 | 2002 Chevrolet Silverado 1500

1 Answer

2001 Mazda Tribute (3.0 L) Heater motor functions on high only


Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

Jan 19, 2010 | 2001 Mazda Tribute

1 Answer

AC only works on low speeds and shuts off Compressor on 3 and 4?


YOUR BLOWER MOTOR RESISTOR NEEDS TO BE REPLACED. IT IS LOCATED IN THE AIR DUCT NEAR THE BLOWER MOTOR. I BELIEVE IT HAS THREE WIRES ON THE PLUG THAT SUPPLIES POWER TO IT. REPLACE THIS AND YOUR A/C WILL WORK AT ALL SPEEDS. HOPE THIS HELPS. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK. P.S.
:RESISTOR SHOULD BE UNDER 40 DOLLARS TO BUY.

May 18, 2009 | 2004 Mazda 6

Not finding what you are looking for?
2009 Mazda Tribute 3.0 Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...