Question about 2002 Chevrolet Suburban

3 Answers

Tried turning on ignition and pump gas pedal three times, but light still flashes

How do I reset the change oil warning light on an 02 Suburban?

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 81 Answers

Look in you owners manual if you have one, It should tell you there.
If not call one of your local jiffy lube or minit lube, they should be able to tell you how to reset it.
Good luck

Posted on May 20, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 31 Answers

Disconnect the battery terminals, touch the two cables together for 12 seconds, then reconnect cables to battery posts. start engine, oil change light should be reset.

Posted on May 20, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Simple way, disconnect the negative from your battery. Down fall is you lose all your presets and everything else, and make sure if you have a security device on your vehicle/key ring...make sure that is near you when you reconnect. Leave it disconnected for about 2 minutes or so.

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

1 Answer

How do i reset the oil change light


Put the key into your ignition and turn it 2 clicks forward to the "run" position but don't start the engine. wait a few seconds until all lights are cleared, oil light should still be present. Now fully depress and release accelerator pedal three times within five seconds.
If CHANGE ENGINE OIL lamp flashes it means system has reset itself

Jun 14, 2014 | 2001 Chevrolet Suburban

1 Answer

How to reset the change oil light on 2001 chevrolet suburban LS


Turn the ignition key to on position, but do not start the vehicle.
Wait for the "change oil light" to come on
Tap the throttle pedal three times quickly
Wait for the light to flash several times, then go out.
Start the car and drive and it won't come back on.

It usually works the first time, but repeat if light stays on.

Jul 28, 2012 | 2001 Chevrolet Suburban

2 Answers

Reset change oil light on 2004 bruick revendevo


hi there
to reset this turn your ignition on without starting and press accelarator all the way down three time within five seconds the oil light will flash twice and you will have reset it have a wonderful day and thank you

Aug 22, 2011 | Buick Rendezvous Cars & Trucks

1 Answer

How to reset change oil light on a 02 trail blazer lt


To reset the change oil light, do the following:

  1. Turn the ignition key to run with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. If the CHANGE ENG OIL light flashes for five seconds, the system is reset. If the light does not flash, repeat procedure.

Nov 19, 2010 | 2002 Chevrolet TrailBlazer

2 Answers

After my recent Oil Change my Chrysler Seabring 2008 Seabring Convertible gives me a Change Oil Message each time I start the engine.


TRY RESETTING OIL CHANGELIGHT BY TURNING THE IGNITION SWITCH TO THE ON POSITION WITH ENGINE OFF.TURN IGNITION SWITCH ON 10 SECONDS PUMP ACCELRATOR SLOWLY 3 TIMES .UNTIL OIL CHANGE LIGHT FLASHES THEN IT HAS RESET.

Oct 18, 2010 | 2008 Chrysler Sebring

2 Answers

Change oil light will not turn off after changing oil. how do i reset it


Turn the ignition set to ON, without starting the engine. Press the gas pedal three times in quick succession and watch for battery light to flash three times, when it does, it is reset.

Hope helped (remember rated this post).

May 13, 2010 | 2001 Chevrolet Silverado 2500HD

2 Answers

Change oil light


It's a nag lihgt to remind you to change the oil.

To reset the warning, turn your ignition key to on, but not start. Pump your gas pedal three times quickly and the light will disappear for another 3000 miles.

Nov 07, 2009 | 2002 GMC Envoy

1 Answer

How do I reset the change oil light on a 2003 Chevy Surban


rotate ignition switch from off to on three times. With ignition in on position not running press gas pedal to floor three times. Turn ignition off then start vehicle.

Jun 22, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

Change oil soon light. how to get it to shut off


Answer The "change oil" light on a 2001 Grand Prix is reset by pressing the gas pedal three times while the vehicle is in "accessory" mode:

1. Turn the car off.
2. Place the ignition key in the "on" position, without starting the car. That is, turn the key forward to the place right before it fires the engine.
3. Place your foot on the gas pedal and press it all the way down three times, waiting approximately one second between presses.

If done correctly, the "change oil" light will flash repeatedly, and will then reset.

Please note that it is rare to do this successfully on the first try; if it does not work, turn the car off and try the procedure again, varying the wait slightly between pedal presses at each attempt

Apr 16, 2009 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...