Question about 1998 Dodge Ram 1500 4WD

1 Answer

Need to get this fixed remove water pump pully on 99' dodge 5.9 liter

How do you remove the water pump pully on 1999 dodge 1500 w/ 5.9 liter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You will need a special holding wrench made by "LISLE TOOLS" or "OTC", most tools stores stock it
its fairly cheap, looks like a long thin como wrench, and might com in two pcs, one for fan clutch.
good luck

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump on a 2001 caravan


3.0 timing belt driven, if a 3.3 or 3.8 serpentine belt driven,darin cooling system,remove serp belt,remove water pump pully & pry motor over to left while feeding the pully past the rt frame rail,unbolt water pump then reverse what you took off.

Oct 04, 2014 | 2001 Dodge Caravan

1 Answer

Can't remove water pump from 2007 Dodge Grand -


you must undo the three pully bolts turn the pully so it slips behind the mounting flange , then you should be able to wiggle it out , if it still hangs on frame you a long pry bar and push between frame and crankshaft bolt just hard enough to move engine slightly, this will definitly work and repeat to install. PS use a little RTV silicon to hold seal on new pump.

Mar 23, 2010 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Replacing water pump on 5.2L 99 dodge dakota water pump pully is broke so i cant take off the shaft that holds the fan and fan clutch im just looking for sugestions


somehow you need to grab a part of the pulley to prevent it from turning.i dont know if you were aware that the fan and clutch do not unbolt byt unscrew like a nut the directin to remove is on the fan shroud. if you cant get the fan off take the pump off with the fan on it, it can be done just you will have to remove shroud with it.then wrestle with it on the bench

Mar 08, 2010 | 1999 Dodge Dakota

1 Answer

2005 Dodge Grand Caravan 3.8 liter engine needs water pump replac


3.3 & 3.8 same block. V6 no special tools needed

Sep 29, 2009 | 2005 Ford F-150

1 Answer

How do you change a water pump on a 1992 Chevy Lumina


No need to drain rad You dont even need to remove the lower rad hose just remove the four bolt on the water pump pully 10mill wrench then the pully should come off after that there are 5 8mill bolt that attach the pump to the housing easy as that by the way you need to left up the idler pully to get the belt off it swings up.

Jul 17, 2009 | 1992 Chevrolet Lumina

1 Answer

The pully on my water pump is lose


The pulley on the water pump is separate from the pump on both the 6 and V-8 engines (you didn't specify which engine was in your truck).
If the pulley is wobbling around and grinding, the bearings have failed on the pump. The fact that it has not leaked is not unheard of. REPLACE THE PUMP! Continued operation will cause the impeller (the side of the pump which moves the water) to chew up the housing. Not to mention leaving you stranded.

Apr 06, 2009 | 1998 Dodge Durango

1 Answer

Having trouble getting water pump out of 94 lantra 1.8 lt


1. Remove the alternator & power steering pump drive belts.
2. Remove four (4) 10mm bolts holding the water pump pullys & remove the pullys.
3. Drain the Radiator (save coolant if intend to reuse).
4. Loosen & remove AC compressor belt.
5. Remove crankshaft pully (22mm bolt).
6. Remove lower timing belt cover (10 mm bolts) to access water pump bolts.
7. Remove the water pump (12mm bolts)
(1) Remove the 2 bolts, then remove the alternator brace (A). (2) Remove the water pump (B) and gasket.
dbb00ee.jpg ef0cc15.jpg 8. Clean mating surface on engine & install new gasket & pump - reassemble. Refill w/50-50 coolant.

Mar 21, 2009 | 2004 Hyundai Elantra

1 Answer

Water pump on a 99 dodge grand caravan?


what motor...3.0 liter has a pump driven by the timing belt....3.3 is on the passenger side front lower corner of the timing cover

Aug 09, 2008 | 1999 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...