Question about 1999 Ford Crown Victoria

1 Answer

WINDSHIELD WIPERS WHEN I CUT MY WINDSHIELD WIPER OFF THEY RETURN TO THE TOP INSTEAD OF THE BOTTOM.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

Fords seem to have a problem with that,try turning them off really easy,or slow and wiggle the turn signal switch.It could be a few different things wrong with it so it will have to be a process of elimination due to the fact that each part can opperate in different ways...#1-could be the turn signal switch bad which is connected to the wipers,,,#2- there is a module i believe is located behind the glove box door somewhere that may not be letting them shut off in time,,#3-the wiper motor itself has wiper delay and the electric circuit board on the motor is failing,,now,ive seen this happen as well as many other people have and most people dont know exactly whats wrong,and since every part i explained has an electrical connection in them,all you can do is start with the cheapest fix and if you do it yourself and know how to fix things the easiest would be the module.That part i would check with a salvage yard on a "WRECKED" car,chances are it will still be good and for a sign if its good,the wipers would be down where they belong when you see a car to get the part out of.I dont think it matters if its the same exact vehicle,try to stay with the cars of the same class as long they are from at least 1992-and up.

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My windshields wipers wont work


If that happens, your windshield wipers will not work at all and you won't be able to clear any water, dirt, or snow that ends up on your windshield. Replace the windshield wiper motor right away. The windshield wiper fuse is burnt out. When the windshield wiper motor is overloaded, the fuse burns out.23 Nov 2015

Top 5 Reasons Your Windshield Wipers Aren't Working - YourMechanic

https://www.yourmechanic.com/.../top-5-reasons-your-windshield-wipers-aren-t-workin... https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=My+windshields+wipers+wont+work

Dec 12, 2016 | Cars & Trucks

1 Answer

Wipers dont work


If you are positive that your problem is ONLY the motor, these directions won't help.

However, if your windshield wipers do work, but when you turn them "off" they won't return to their resting place (which is at the bottom of your windshield, next to the hood) - instead they just stop straight up on your windshield, here's how to fix that using only a couple of screwdrivers.

What has caused that? You were probably your using the wipers to remove snow or snow and ice from your windshield instead of using your window scraper! Unfortunately the wiper bracket (it's the piece having a tab that has been bent) on many Oldsmobiles isn't strong enough to remove even light snow and/or ice.

Your windshield wiper motor has a mounted bracket over it that has a little metal tab (a "Park Tab") on it that the crank arm assembly has to "hit" in order to "park" the wipers in the correct position. The Park Tab is not covered up - it's part of the mounted bracket - out in the open, and you can see it.

In a many cases this "park tab" is either bent or broken, and if it's bent can be adjusted using a screwdriver back to its original position. It it has broken off, the part that holds that tab will need to be replaced. (I had a bent tab twice and two repair shops said I needed an entirely new motor, when I didn't.)

Go to this link: http://redhouseon7th.com/redhouse/howto/2009OldsmobileWiperRepair/index.html then follow its directions - they are excellent and simple. The link has pictures to show you exactly what to do, step-by-step showing pictures of what it looks like at each step. The only tools you will need are a couple of screwdrivers, and you don't need to replace the motor IF your windshield wipers are "stopping" in or near the "12 o'clock" position. And the "fix" costs are zero. (The repair shop charged me $850.00 the first time I had the problem.)

It's a problem with many Oldsmobiles - the bracket with the "park tab" should have been made stronger in the first place. After my first repair cost, I looked up directions and fixed it the next time. I live in Iowa, and I now always use my snow/ice scraper every time instead of my windshield wipers, and have had no more problems. I love my Intrigue!

Hope your problem is solved! Best wishes!

2002 GM Oldsmobile Intrigue Stuck Up Wiper Blades

Apr 09, 2014 | 2000 Oldsmobile Intrigue

1 Answer

Windshield Wipers park in the up Position


tRY REMOVING THE WIPERS WHEN IN UP POSTION AND REINSTALLIMG THEM IN THE DOWN POSTION THEN TURN THE WIPERS ON AND SAEE WHAT HAPPENS THEN . ALSO CHECK ALL MOUNTS ON THE WIPER MOTOR AND ANY ADJUSTMENT LINKAGE TO SEE IF THEY ARE LOOSE AND MOVED IN ANY WAY

Feb 19, 2014 | 2002 Buick Regal

2 Answers

Intermittent wiper


what car, what year? gee? a suz, what?
it can only be 4 things. (all cars)
1: the wiper motor is bad. (it has contacts inside for timing.
2: the wiper shaft is stripped, nah you said both stalled.
3: the wiring is bad.
4: the combo switch for the above is bad.

DIY, with what , no tools? no meter.?
with no tools one can only GUESS,
roll dice, and replace a part.
after spending $500 on parts and the wires are good then what.
yes, buy a meter.

it could be a bad ground wire.

when you turn on most wipers, the combo switch sends
that signal( just 12v ) to the motor.
the motor is self booting, that is , it only needs the start up
and then it self provides its own power,
ive restored wiper motors, many.
then the motor runs until it his the dead spot in ITS, internal
sustain switch and the halts. if the combo switch is off.
but if the wiper fails to return, this is a bad wiper motor.
(overloaded by ice, sure)
the motor can fail 2 ways, but
id say the sustain switch is at EOL. end of life.

this is the most common design.
check your FSM for yours. the factor service manual.
or alldata dot com. sure.

Sep 25, 2013 | Suzuki Cars & Trucks

1 Answer

Front windshield wipers are crashing into each other


Yes you can adjust them yourself. First you need to check that the wiper arms are not bent. If not, remove the cap at the wiper arm base, under it u will find a nut, remove this nut. you should now be able to remove the wiper arm. (it is comon for caravan wiper arms to be corroded on. If the arm dosen't come off, you may need to heat up the wiper arm with a propane torch. be careful not to melt the plastic cowel under the arm. OR you can use a wiper puller or a battery puller. do not force it, you can break the arm, DO NOT PRY AGAINST THE COWEL OR WINDSHIELD.
Once both arms are off, turn your van on and turn the wipers on. watch the wiper posts, turn the wipers off and watch the wiper posts return and stop in the "parked" position. Turn the van off. Install the passanger wiper arm first, it is positioned closest to the bottom an inch or two above the black cowel. It should be parrallel to the cowel. next install the drivers side wiper arm. it is positioned about 4 inches above the passanger wiper. again running parrallel to the cowel and passanger wiper. tighten the lock nuts down (do not over tighten) wet down your windshield with glass cleaner or windshield washer fluid and test wipers. If they still hit you can lower the passanger one a little or raise the drivers one a little (careful you don't raise the drivers one too much or it will 'jump' off the windshield at the top of the wipe).
good luck, hope this helps.

Nov 23, 2009 | 2001 Chrysler Town & Country

1 Answer

The windshield wipers want move back down when i cut them off


On the wiper motor there is a function called the "park" mode. If the wipers are not returning to the bottom of the windshield the park mode of the wiper motor is malfunctioning. The most common fix for this problem is to replace the wiper motor.
If you have the ability to disassemble the wiper motor you should see a set of contacts inside the wiper motor transmission. These contacts get worn over a period of years and sometimes just a good cleaning will solve the problem.

Nov 05, 2009 | 1996 Lincoln Town Car

1 Answer

Wipers willnot return to park position


I've fixed this problem before. You have to disconnect the wiper transmission from the wiper motor. Put wipers in off position, unbolt the plate on top of wiper, turn wipers on then off. In the off position see where the wiper transmission is position in relation to where the park position is, remove the top plate from wiper motor and position it so as to be able to reconnect the wiper transmission now in the proper place. Please keep me informed. thanks you

Jun 03, 2009 | 2002 Chevrolet Impala

2 Answers

Windshield wipers not parking


The problem could be a bent parking pall bracket. This is usually caused when you wipe snow from windshield using the wipers instead of brushing off. You need to remove both wipers and the cover from the drivers side. Remove the cover over the wiper motor assembly (held by a plastic button). On the right side of the wiper mechanism is a small tab (part of the wiper bracket). This tab needs to be straight for the wiper park pall to rest against.Carefully hammer this tab straight (or you may have to replace bracket, big job) Then cycle the wiper and you will see the assembly return to park position. Re-install all parts in reverse order.
Hope this works for you.

Jan 15, 2009 | 2003 Chevrolet Impala

1 Answer

Wiper problem


Toyota Ed is right. He should get credit, but this questions needs to go away, sorry Toyota ed.

Oct 16, 2008 | 2000 Toyota Avalon

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...