Question about Citroen Xsara

Open Question

Serpentine belt diagram 05citroen xsara 1.6 petrol

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach

7f8b868.gif

Posted on Jun 16, 2008

  • 2 Answers

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Posted on Jul 18, 2008

autodr
  • 260 Answers

SOURCE: serpentine belt diagrams

8d144a3.gifhope this helps

Posted on Nov 18, 2008

Molson02536
  • 3854 Answers

SOURCE: serpentine belt diagram

The serpentine belt routing should be labeled on your radiator shroud. Look around the engine compartment like the hood or radiator fram suport and there should be a label with the the belt routing.
Good luck and hope this helps

Posted on Apr 19, 2009

  • 1 Answer

SOURCE: diagram for 1998 buick lasabre serpentine belt

I found the diagram in my owner's manual.
I replaced the belt on mine just 2 days ago. All you need to do is remove one bolt from the lower motor mount and remove the spacer. After you relieve the belt tensioner, the belt will slip right through the gap. Don't forget to support the engine before removing the bolt. As a backup I took a photo of the belt with my digital camera beforehand... just in case.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

Valve timing order citron xsara199 1.8 16valve engine


I don't know this car, but the #1 cylinder is always at the front of the engine. The front is where the crankshaft pulley turns the serpentine belt or all of the belts that are utilized, and the rear of an engine is where the transaxle mates to it. So the cylinder numbering order is 1-2-3-4.
The firing order on all 4 cylinder engines is 1-3-4-2.

May 31, 2014 | 1998 Citroen Xsara 1.6

1 Answer

Hi, i have a x reg peugeot 206 hdi, the serpentine belt snapped, i have a new 1 but cannot find a diagram on how to fit it. please help.....i need my car!!


Peugeot 206 1.4 HDi - DV4TD (8HZ) 2004 ...

1. The serpentine belt routing diagram - without A/C (Air Conditioning)

tdisline_888.jpg


2. The serpentine belt routing diagram - with A/C (Air Conditioning)

tdisline_889.jpg

Sep 18, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Belt diagram 2000 vw caravelle 2.5 l petrol


The ancillary serpentine belt routing diagram for a 2000 VW Caravelle 2.5 l petrol

1. Without Air Conditioning - A/C system

tdisline_598.jpg


2. With Air Conditioning - A/C system

tdisline_599.jpg

Jun 01, 2011 | Volkswagen Camper Cars & Trucks

1 Answer

Need diagram for replacement of serpentine belt for ford escort 1998 4litre engine double overhead cam. also need belt size or number


must be a special ,never seen a fords escort with a engine bigger than 1.6 litre on a petrol or 1.8 diesel

Nov 25, 2010 | Ford Escort Cars & Trucks

1 Answer

How toreplace a serpentine belt on an oldsmobile auruor


It's easy to replace a serpentine belt on an Oldsmobile Aurora.

Just release tension on the serpentine belt by using a 1/2" breaker bar on the tensioner pulley. Then, undo the belt.
Insert the new belt around the various 'smooth' and 'grooved' pulleys by matching the smooth pulleys with the back of the serpentine belt, and matching the grooved pulleys with the grooved inside of the serpentine belt in question, that you've bought from the store based on the year,make, model, and engine size.

It actually will come together more easily than worrying about a belt diagram, although a belt diagram can be helpful to understand how the belt weaves in and out of the various pulleys.

Often, there will be a sticker under the hood area where a belt diagram exists, but it's not necessary to have one to perform the service yourself.

Aug 29, 2010 | Oldsmobile Aurora Cars & Trucks

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

Serpentine belt diagram ford escort 1.6i 1999


petrol or diesel ,what year ,american build or europeon

Mar 20, 2010 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14184 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...