Question about 1995 Toyota Land Cruiser
shut down the engine for atleast 30 minutes to cool,the starter motor was located under beneath the engine,the pinion driver was coincide to flywheel,if you want replace starter motor,disconnect starter regulator cable, loosen two bolt on the engine starter motor holder,try to swicth starter motor on a free way that could go out on mounting space,the exhaust manifold mostly is behind the way of starter motor if hard to pull out,if necessary disconnect exhaust manifold replace exhaust manifold gasket,distortion on manifold gasket may happen after removing manifold
. pull out starter motor and replace a new one, put back also exhaust manifold if you disconnect it.
set fender covers on each fender to prevent paint damage
select the correct size open end box end wrench or ratchet, socket and extension. This procedure is much easier using the ratchet, socket and extension. Use your wrench to remove all of the manifold mount bolts. The manifold will now be free enough to access the gasket behind it
remove the old gasket using your putty knife. The gasket should come of mostly intact. Use your putty knife to remove any gasket material that remains on the engine block or the manifold. Any gasket material left on the mounting surfaces will cause leaks that inhibit engine performance coat the new gasket on both sides with a light coat of anti-seize compound. Put the new gasket in place against the block mounting surface. The anti-seize compound will hold the new gasket in place and prevent the gasket from sticking to the mounting surface, making future repairs easier.
push the manifold in against the new gasket and the block. coat the threads of your manifold bolts with a light coat of anti-seize compound. This will protect the threads on the bolt and the mounting surface. Start all manifold bolts by hand to ensure that the manifold is positioned evenly against the block. Be sure that the gasket remains lined up with the mounting holes. If the gasket slips out of position it will leak.
use your wrench or a torque wrench if required by the service manual to tighten all manifold bolts. Start the engine and check for any leaks. no leaks means you are done.
have a nice day don't forget to rate me,thanks a lot.
Posted on May 20, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 17, 2014 | 1998 Holden VT Commodore
Mar 22, 2017 | Cars & Trucks
Nov 28, 2012 | 2004 Dodge Neon
http://www.fixya.com/cars/r6222268-engine_doesnt_crank_turn_over . These are generic instructions. If you get stuck, please get back to me, but I think you need a new solenoid and not necessarily a starter motor to go with it.
Nov 01, 2010 | 2003 Toyota Matrix
Aug 22, 2010 | 1998 Oldsmobile Intrigue
Apr 25, 2009 | 1989 Chevrolet C1500
Dec 28, 2008 | 1999 Ford Expedition
403 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: