Question about 2009 Dodge Journey 2.4
I have multiple misfire on cylinder number 3 on my 2009 dodge journey with a vvt 2.4 liter engine. Where is cylinder number 3 located?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
click on this link, and scroll down to 5.7L
Posted on Dec 22, 2008
Spake pluge could have gone bad, or the Spark Plug wire. Try changing all your plugs and wire and inspect the old one's. The wire could be bad do to time or may have been against the exhaust manifold and brunt. Good luck
Posted on Apr 08, 2009
SOURCE: Check engine light
A multi misfire may mean that one or more of the following has happened:
Faulty spark plug or wires, Faulty coil (pack), Faulty oxygen sensor(s), Faulty fuel injector(s), Stuck/blocked EGR valve / passages, Faulty camshaft position sensor, Defective computer.
The engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wire, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the the problems were faulty fuel injectors.
Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.
Good luck and hope this information helps, keep me posted, be glad to help you get the truck running 100% again. Not sure if your running a K&N air filter, and if you are there may be a flim of oil on the MAF sensor that is making you run lean. You may want to spray down the MAF sensor with a can of MAF cleaner.
Posted on Jul 02, 2009
SOURCE: 2004 Neon SXT cylinder misfire
TRY REPLACING THE CRANKSHAFT POSITION SENSOR..HAVE SEEN THESE CAUSE MISFIRES AND LOW VOLTAGE DTCS AS PCM THINKS VEHICLE IS NOT RUNNING..ALTERNATOR MAY NOT BE PUTTING OUT PROPERLY
Posted on Jul 07, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
I do not know if you still need this information, but I am going ahead and answering it anyway.
The Dodge 3.9L (238 cubic inch) Engine from 1988 thru 1996 is the same:
(back of engine)
(front of engine)
Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 10, 2010
Tips for a great answer:
Aug 08, 2016 | 2010 Dodge Ram Pickup 1500
May 07, 2013 | Cars & Trucks
Dec 12, 2011 | 2006 Dodge Stratus
Apr 04, 2011 | 2001 Dodge Dakota
Feb 14, 2011 | 1998 Lexus Gs 400
Dec 18, 2010 | 2006 Dodge Magnum
Oct 29, 2010 | Dodge Pickup Cars & Trucks
Feb 03, 2010 | 1996 Dodge Caravan
Apr 04, 2009 | 1996 Dodge Ram 1500 Club Cab
180 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: