Question about Cars & Trucks

1 Answer

Won't start Is winding over just not fireing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

You must first determine if it is fuel or spark problem. Squirt some starting fluid in carb if it has carb or in fuel intake if newer vehicle. If it even attempts to start you have a fuel problem. To find if it's spark related take out the easiest spark plug put the wire back on it, lay the plug againt a metal part of the engine, and have another person turn the engine and you watch for a spark at the plug gap. If you have spark you have a fuel problem, if no spark you have an ignition problem.

Posted on Jan 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Qadra fire mt Vernon non ae feed uger runs in revere


For an electric motor to run in reverse the start windings have to be reversed at the terminal. To lock up indicates that the start windings are not getting power. All these are controlled by the start/run capacitor which is the normal failure point on electric motors. Take the motor to an accredited electrical shop and have it tested

Nov 13, 2014 | Cars & Trucks

1 Answer

Coil packs not firing on 2000 s type 3.0 jaguar


The coils have battery voltage running through the primary windings, and grounded in the ignition control module. The engine computer signals the ignition module when to cut the primary current, thereby inducing high voltage in the coil's secondary windings and spark at the spark plug.
The computer processes all sensor information, but primarily from the crank position sensor, to determine spark timing.

Nov 17, 2013 | Jaguar Cars & Trucks

2 Answers

1991 dodge spirit stalls then won,t start


Have you checked the ASD relay, and do you have spark to the plugs ?

Jul 11, 2013 | Cars & Trucks

1 Answer

My 1999 ford wind star won't start after trying to install a stereo my self battery says its fully charged


check all fuses then the ignition module with a timing light then the fuel pump one of these will fix the problem

Feb 04, 2013 | Cars & Trucks

1 Answer

Car won't start 2003 Dodge Stratus sxt coupe cranks but won't start what could b the problem? I tried spraying starting fluid in the air system but it still won't start!


i would check and see if spark pluges are firing. you can take one out and plug into spark plug wire then let the bottom of the plug sit on engine and get someone to try to start while you look at the plug to see if there is any fire. if you have no fire or fuel it would be the crankshaft sencer. it could be the timing belt but the motor would sound different turning over then it used to.

Dec 22, 2012 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...