Question about 1995 Mitsubishi Eclipse

2 Answers

MY AXEL FROM MY PASSENGER SIDE SEEMS TO BE SHORT AND SOUNDS LIKE IT JUMPS I WENT TO AUTO ZONE AND THEY TELL ME ITS THE CORRECT AXEL

I CHANGED THE TRANSMISSION AND CLUTCH AND THE PROBLEMS LOOKS LIKE THE AXEL IS TOO SHORT. NOW THERE TELLING ME MY MOTOR AND TRANSMISSION MOUNTS ARE BAD CAN THIS BE THE PROBLEM CAUSE IM RUNNING OUT OF MONEY.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Mitsubishi Master
  • 975 Answers

Only thing I can think of,the turbo and normal cars use a different spline count,if yours is a turbo and you got a non-turbo trans.or
vise-versa. It won't work.

Posted on Jan 01, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 77,169 Answers

It is the correct axle.

Posted on Jan 01, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 396 Answers

SOURCE: 01 eclipse gt auto transmission went bad,put in 04

did you change the powertrain control module with the trans?? if not thats probably where the problem lies, ive saw many people get mad and agervated just to realize they had to change the computer for trans with it..... just a thought.

Posted on Nov 29, 2010

  • 4044 Answers

SOURCE: Friend took to auto zone

All three are possibilities. Without knowing what the vehicle was doing no one here would be able to say otherwise. If it is an Automatic, considering they mentioned a solenoid, and the fluid is low, a check you can do, add fluid to the proper level and see if the problem resolves itself. If it doesn't you will need to take it to a transmission shop to have it diagnosed to the exact problem.

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rpms jump up and down when im driving, it would also turn my abs light on and the brake warning light when it did it. i also felt the car bucking when the rpms would jump. i was turning into a parking...


Sound like she's idling too low.You're going to have to adjust that.You might want to check the spark plugs and plug wires...sometimes the plug wires can slip off and it feels like you went down a few cylinders.If it feels like it's going to cut out on you put her in neutral,that will take the strain off of the motor and what not.You should go to Auto Zone and get them to hook up to the car's computer to see what's wrong.Auto ZONE does it for free.Or if you have a mechanic friend that have a diagnostic meter, he/she will hook it up to car's computer also and it will tell you what codes are coming up and the mechanic can tell you what they mean and how to correct them.GOOD LUCK!

Sep 08, 2011 | GMC Jimmy Cars & Trucks

1 Answer

1999 GMC Denali heater blower motor is always on high. The only way to stop it, while the vehicle is running, is to pull the 25A fuse. The switch does nothing, even in the "off" position.


Hi,Sounds like your resister for your blower motor is shorted. this is mounted under the passenger side of the heater box where the blower motor is. This resister board has a reley mounted on it for high speed operation. very easy to change around 40 bucks at auto zone.

Aug 25, 2010 | GMC Denali Cars & Trucks

1 Answer

I have a 1996 Dodge Caravan 3.3L Van. Battery was installed incorrectly,and the horn,windshield wipers,and lights went crazy,toasted the fusible link.Battery is installed correctly,all fuses have been...


you need to check the grounds if they shorted the sytem they may have damaged the grounds one bad connection can cause lots of problems if it will drive you could take to auto zone an they will run codes an tell you whats wrong if you can not drive it google your van an ask how to read codes it will tell you how to jump the connector an read codes from the check engine light

Aug 01, 2010 | 2000 Dodge Caravan

2 Answers

OBDII codes P0135-P0141-P0161 need help heater circuit to o2 sensors all 3,


I would say u have a shorted heater circuit, have u checked the fuses under the hood and in the cab? if it is blown disconnect the sensors and see if it happens again.

Sep 11, 2009 | 1997 Chevrolet Blazer

1 Answer

94 protege axels will not come out!!


you are going to have to jiggle and pry they also make a axel tool to hammer in but the ring on tip gets caught and it is a pain.try twisting and pry from more than one direction if you can like lift from bottom pry from top or side. good luck you will get them.

Jun 23, 2009 | 1995 Mazda Protege

1 Answer

Will a 1990"s model ford taurus front end axel inter change with a ford taurus 1988. Oh that's driver and passenger side axels.


it should as long as everything is the same. you could call your local parts store just to make sure and they will tell you

Nov 30, 2008 | Ford Taurus Cars & Trucks

1 Answer

There is a problem with my passenger side door lock(Manual - The


this problem seems to be connected to the door jam switch(s). does the breaker switch become hot ? If it does your problem might be the door jam switch from the passenger side. this causes other problems too. It sometimes causes the seat to not work either. Check the breaker switch for the door.replace it if it is hot.

Nov 11, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1995 Mitsubishi Eclipse Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...