Question about 1998 Volkswagen Jetta
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Posted on Nov 17, 2009
Testimonial: "thanks randyman couldnt see it but the teeth on the lower part of the belt where stripped off"
first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful
Posted on Feb 08, 2010
check for a spark at the plugs if you dont have this then you will need to check that the ingintion coil has a live feed and and earth the pins 1 and 3 on the conector if you have this then you will need to check that you have a pulse from the hall sender this is in pin 2 of the conector check it with a circuit tester and the led should flash if it does then the ignition coil has had it if not then check for a live and an earth at the hall sender ( three pin plug on the distributor ) pins 1 +3 if this is ok you will need a new distributor also worth checkin for a live at both of these with someone cranking the engine if you loose the live feed under cranking the you will need an ignition switch
Posted on May 07, 2010
Tips for a great answer:
Sep 01, 2014 | 1998 Volkswagen Jetta
Oct 16, 2010 | 1987 Volkswagen Jetta
Nov 17, 2009 | 1998 Volkswagen Jetta
May 31, 2014 | 1998 Volkswagen Jetta
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: