Question about Cars & Trucks

1 Answer

I have a 92 model tarago fuel injected just put in an import motor changed injectors and distributer fires but won't run what the prob and how can it be fixed

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,822 Answers

What is a Tarago?

Posted on Jan 01, 2014

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: merc 190e fuel injection problem

If the fuel gets to the distributor but no fuel comes out of the distributor if the airflow disk pushed into the air/fuel mixure body, i suggest you check the electro-hydralic-actuator
53703cc.jpg Its the black box (picture thanks to elproboscis from ebay america) as it controles the flow to the pluger body inside the centre of the distributor and goes from the plunger direct to the 4 outlines.

Posted on Aug 18, 2008

  • 1 Answer

SOURCE: injectors not spraying

have u got this fixed im having the same issue if so email me at please im desprate

Posted on Sep 25, 2008

  • 117 Answers

SOURCE: engine turns over, fires, but won't run 1990 f250

I'm assuming its carburated???? is so, check that the choke is engaging and if possible, try cleaning the idle circuit in the carburator....these things are tricky.....also look for old cracked vaccum lines as the older trucks (mine included) are VERY sensitive to vaccum leaks.

hope this helps, good luck

Posted on Jul 08, 2009

  • 2187 Answers

SOURCE: i have a 1996 nissan

inspect the wiring for loose connections or bad wiring.

try adjusting first the distributor by turning it. It should adjust the timing. Other than that inspect the timing on the timing chain or the chain may have developed a slack.

Posted on Sep 02, 2011

  • 693 Answers

SOURCE: 1993 3500 chevrolet cranks got fire to the plugs but fuel pump wont run and injecters wont fire wat is the problem?

most likely fuel pump is out , It could be not pumping hard enough to get through the injectors. good luck

Posted on May 02, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Won,t start put gas in throttle body it will run

What is year--make--model? Have to check proper fuel pressure and fuel injector pulse, if you have fuel injection.

Mar 13, 2015 | Cars & Trucks

1 Answer

1992 525i, engine turns over but will not fire

check your crank poistioning it fuel injected?if it is fuel injected check for injector signal which will tell you thatyour ECM is getting crank poistioning signal and distributer signal,check fuses if there is no signal, bad injector

Feb 10, 2015 | Cars & Trucks

1 Answer

I have a Daewoo lanos 1500 98 and firing very weak on 3. ive changed distributer, leads, plugs, what can I look for next?

You may have a failed or clogged fuel injector (if it uses multi-port injection) or that particular cylinder may have low compression because of a burned valve or bad piston rings. Have both the injectors and the compression tested and be sure a full leak-down compression test is performed.

Nov 02, 2014 | Cars & Trucks

1 Answer

Let verify i have an 86 nissan 300zx. Fuel injected. I've changed the injectors. Distributer plugs. It runs fine until its hot then starts running real rough. Won't accelerate and puts out a lot of...

Check for compression on your cylinders. That would tell you if you have a bad head gasket or a bad head.check your distributer and see if is good, i seen that happend too

Mar 16, 2013 | Cars & Trucks

1 Answer

92 honda accord is firing but won't start

Hi there:
You will have to pinpoint what the engine is missing... Spark / Fuel / Compression

All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.

Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 06, 2012 | Honda Accord Cars & Trucks

1 Answer

1993 3500 chevrolet cranks got fire to the plugs but fuel pump wont run and injecters wont fire wat is the problem?

most likely fuel pump is out , It could be not pumping hard enough to get through the injectors. good luck

May 02, 2012 | Chevrolet Cars & Trucks

1 Answer

+after running out of fuel car won't fire. Turns over but wont fire up

When you run out of gas in your car, there are a number of parts of the vehicle that can be damaged. For example, running a car without gas can damage the fuel pump, fuel filter, or push dirt through out the fuel line of the vehicle.

What you need to do is remove the air from the injection lines, the reason is when air is in the lines the fuel cannot form enough pressure to open the injectors due to the air compressing instead of being a solid fuel. So first step is to fill the fuel filter.

Next, follow the fuel line from the filter and see if it goes to a small primer pump optional on most machines, if not the go to the injector lines at the injector. Loosen all the lines and apply full throttle making sure the stop is push in SO the machine will run. Crank the motor for 15-20 seconds or until you see fuel pulsating out the loosened lines.

To help protect yourself against risk of running out of gas, consider filling up your tank anytime your fuel indicator falls below 1/4 a tank.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Jose (ZJLimited)

Nov 03, 2011 | 1996 Oldsmobile Cutlass Ciera

2 Answers

92 chevy astro van fuel pump and relay

Injectors or Carb? is there fuel presurt to the line near the engine and what is the presure.
The mechanoc was it a shop or buddy at home? Can you hear the fuel pump run when the key is turned on?

Jul 17, 2008 | 1992 Chevrolet Astro Extended

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides