Question about 2000 Mazda Millenia

1 Answer

Mazda millenia problems

Anything i should know about yr 2000 mazda millenia supercharged?

Posted by on

  • 3 more comments 
  • ehoemile May 20, 2009

    thank you pal....that was very helpful..thanks

  • Dave  C
    Dave C May 11, 2010

    Absolutely terrible transmissions and expensive to repair.

  • Keith Heavilin
    Keith Heavilin May 11, 2010

    Is there anything specific that you are looking for?  I remember a neighbor I had a few years ago had one and complained all the time about all the problems he had with it and talked about how he didn't like it but I don't remember what the problems were.

  • Anonymous Mar 15, 2014

    won't work drivers front changed bulb did not solve problem

  • Anonymous Mar 23, 2014

    overheathing

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 117 Answers

Here are a few problems to look out for:

Check-engine light: Check engine light comes on due to carbon buildup on the exhaust valves of 2.5L engine. (1995-02)

Engine noise: Some engines make a metallic tapping noise requiring a new friction-gear spring on the camshaft. (1995)

Headlights: The headlight drain hoses can get kinked by the aiming screws causing fogging. (1995-96)

Keys: It may be hard to turn the ignition key because the steering shaft is not positioned correctly. (1995)

Steering problems: The steering wheel may be off center requiring adjustment of the tie rods. (1995). You can also have a look at the following website where some owner have given their opinions on owning one. http://www.carsurvey.org/reviews/mazda/millenia/r68654/comments/

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Leaking water


hi i have mazda millenia s 2002 i have problem the water spring from exhaust and some knocking from supercharged i dont know where is the problem thanks jozef

Sep 03, 2013 | 2002 Mazda Millenia

1 Answer

Replacing supercharger procedure


1.Remove the top inter cooler piping
2.remove supercharger belt
3.remove vacuum lines (mark locations )
4.remove both injector rails
the supercharger can be pulled out ...bit of a tight squeeze
make sure that you replace all "o"rings when replacing the supercharger

Oct 24, 2012 | 2000 Mazda Millenia

1 Answer

How to replace valve cover gaskets on a 2000 mazda millenia w/ 2.3 DOHC Supercharger?


just look at the valve covers some are held in place with 6 bolts some only 3 do one at a time and keep working area clean and free of dirt n grease. clean valve cover good and have clean hands when handling gasket, and there your done just replace and bolt down , check bolts again for tightness in a couple weeks.

Apr 25, 2010 | 2000 Mazda Millenia

1 Answer

Need to find the proper routing for the belts on a 1996 mazda millenia its a 2 belt system with a supercharger.


CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/millenia/1996_mazda_millenia_drive_belt_routing_diagram.htm

Feb 27, 2010 | 1996 Mazda Millenia

2 Answers

2000 mazda millenia pulled oil through the air intake and started smoking, why?


could be excessive "blow by". oil may be getting past the rings on the pistons.

Aug 08, 2009 | 2000 Mazda Millenia

1 Answer

Supercharger in a 2.5 engine


Superchargers are very cool stuff, but they are very expensive to buy, difficult to maintain and if the engine is not in top notch condition and specially prepared for the extra cylinder pressures likely you will blow it up shortly after installing it. I used to build blown fuel engines and know what goes into them, and what happens to them (even the most expensive and best prepared have short lives.) Granted a street unit wont make the boost I'm familiar with but the result is the same. So, even if you can find a kit somewhere, be prepared to own a pile of scrap metal shortly thereafter...

May 29, 2009 | 1997 Mazda Millenia

2 Answers

Engine size problem


There were 2 engine choices in 1998. A 2.5 liter 170 HP V6 on the standard and premium model, and a supercharged 2.3 liter 210 HP engine in the S version of the Millenia. So, if you have an S you have a supercharged 2.3 liter, if not, you have a 2.5 liter.

Dec 01, 2008 | 1998 Mazda 626

Not finding what you are looking for?
2000 Mazda Millenia Logo

840 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...