Question about 2000 Toyota 4Runner

1 Answer

How to change 4wd light indicator on 2000 4Runner

4wd indicator light burned out. The switch (can hear it click) works fine. How do I change out the idiot light? The dealership wants $110 to do it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Have to remove dash panel. Some panels are easily removed others require dash removal. I would reccommend buying a repair manual (20$) and determine if its worth time, tools, and money. If your 4X4 works just fine the absence of the light has to annoy you enough to replace it

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 06 Chevy trailblazer and the 4wd/auto switch is gone and it has been jumping from 4wd to auto . What do I do to fix it, I don't think a new switch is the fix


Most likely the control module assembly is the problem. It can be located under the dash and sometimes behind the passenger kick panel cover. You will normally hear a click noise when you engage the 4x4 and this click noise will indicate the location of the controller. You may not be able to access 4x4 hi if the lights are flashing but 4x4lo usually works.

Apr 25, 2015 | 2006 Chevrolet Trailblazer

1 Answer

1998 Chevy Suburban - service 4wd light comes on after running 4x4 for 2 mins


Well it could be the selector switch, but I doubt it.
Generally, the service light means something is not working that the computer controls. Solenoids and valves are a couple of possibilities.
The transfer case is shifted by solenoids commanded by the body computer based on the switch position on the dash.
You should be able to have a shop scan the body computer for trouble codes and proceed from there.
A basic code reader may not access the body computer.

Jul 05, 2012 | 1999 GMC Suburban

1 Answer

4wd does not work iv changed the 4wd switch but still does work and on the 4wd switch none of the lights come on to tell you if you are in 2wd or 4wd hi or low


the switch is probably from a newer modle truck, although they work the indicator lights don't always work, and check the 4x4 fuse in the fuse panel on the left side of the dash by the drivers door

Nov 07, 2010 | 1999 GMC Sierra

1 Answer

My 2001 silverado w/69,000 miles has no light indicating 2 or 4 h


THE TRANSFER CASE MOTOR IS NOT WORKING TO INGAGE 4 WHEEL DRIVE. CHECK WITH DOOR OPEN WHEN YOU PUSH 4 WHEEL SWITCH YOU SHOULD HEAR MOTOR INGAGE 4 WHEEL DRIVE. IF YOU HEAR MOTOR BUT STILL NO 4 WHEEL DRIVE THE GEAR ON MOTOR COULD BE DAMAGED. REPLACE TRANSFER CASE MOTOR.

Jan 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

4wd drive light wont work on 1990 toyota fourunner,will go into 4 wheel drive.


Either the wire is disconected from the indicator switch in the tranfer case, the indicator switch is bad, the bulb in the light is burned out, or you have a broken wire. My bet would be on the switch.

Oct 05, 2009 | 1990 Toyota 4Runner

1 Answer

Service 4wd light is coming on but 4wd works fine


i had the same problem in my 99,i replaced the switch assembly on the dash and all is well,hope this helps

Sep 01, 2009 | 1999 GMC Sierra

1 Answer

2002 envoy 4wd problem. clicking sound comes and


Clicking sound- Possible electronic fan clutch failing. This is a typical problem with the 4.2L I6. When you hear the clicking, open the hood and listen if its coming from the fan clutch on front of the engine. this could also cause abnormal engine and transmission cooling. As for the "N" light and 4wd issue, have scanned at the dealer....Hopefully this helps

Jul 18, 2009 | 2002 GMC Envoy

1 Answer

4wd not engaging no indicater lgt basicaly no 4wd


I had a prolem with my 1998 Ford Explorer XLT. The 4wd indicator light would randomly start to blink while moving and when I flipped the switch to 4wd hi or low it would engage but easily disengage and the indicator lights would not come on. I was hearing a grinding sound coming from my hubs so I replaced both front hub assemblies and the light stopped blinking and 4wd hi/low works great now. it was about 300 bucks for the hub assemblies and only took me an hour or two to change.

Nov 14, 2008 | 1991 Ford Explorer

1 Answer

1995 Doge Dakota 3.9 v6 electrical issues


it sounds like you have a major electrical problem check all the fuses and look for any burned wires under the hood

Sep 26, 2008 | 1995 Dodge Dakota

Not finding what you are looking for?
2000 Toyota 4Runner Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...