Question about 2006 Hyundai Sonata
Snaps in .. just a little tricky to get it out once it's snapped in.
Posted on May 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 08, 2014 | 2006 Hyundai Sonata
Jun 29, 2011 | 2006 Hyundai Sonata
This TSB supersedes TSB 03-40-013 to add repair information (Steps 2~3).
An improperly adjusted or improperly operating range switch may result in the following conditions:
• Diagnostic trouble codes:
• P0705 - Range switch signal problem
• P0707 - Range switch - open circuit
• P0708 - Range switch - short circuit or multiple inputs
• Malfunction Indicator Light (MIL) illuminated
• Impossible engine start in "P" or "N"
This TSB provides information concerning the proper adjustment and diagnosis of the transaxle range switch.
1. Attach a GDS and check for DTC in both the "Engine" and "Automatic Transaxle" menus. Go to Step 2 for 2000~02 Accent or Step 3 for 2006~ Sonata. For other vehicles, go to Step 4.
2. For 2000~2002 Accent: Check according to TSB 03-40-001. Go to Step 4.
3. For 2006~ Sonata, follow steps a,b,c below, then go to Step 4.
a. Check the rear combination lamp ground bolts for tightness and good electrical contact (refer to applicable ETM, "Tail, Parking & License Lamps" section). Go to Step b.Page 2 of 6
b. For 2006~ Sonata: Remove the center console cover and check for contamination on the M40 connector to the sports mode switch. If so, clean and repair the connector as necessary. Go to step c below.
c. For 2006~07 Sonata: Remove the front pillar cover and verify the harness is properly routed near the clip. Repair the harness as necessary. Go to Step 4.
4. Attach a GDS and select vehicle, "A/T" menu, "Current Data" and "Shift Lever Switch".
5. Move the shift lever and confirm the GDS reads the gear shift position as shown below. If so, the harness currently does not have an open or short circuit between. the PCM/TCM and range switch.
Hope this helps.
Feb 11, 2011 | Hyundai Elantra Cars & Trucks
Apr 24, 2010 | 2006 Hyundai Sonata
Feb 19, 2010 | 2006 Hyundai Sonata
Nov 08, 2009 | 2006 Hyundai Sonata
Aug 31, 2009 | 2006 Hyundai Sonata
Aug 16, 2009 | 2006 Hyundai Sonata
Jun 17, 2009 | Hyundai Motor 2002 Sonata
Dec 11, 2008 | 2006 Hyundai Sonata
83 people viewed this question
Usually answered in minutes!