Question about Cars & Trucks
Power windows door locks and dome lights dont work
Check all the fuses if that fails to sort it out then call out an autolec
Posted on Dec 31, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.
Posted on Dec 07, 2008
It has to be a broken wire! Initially, I lost the door locks & power to the windows ONLY when the drivers door was open. When I closed the door, the problem went away. Finally, I had the problem all the time. I checked for 12 vdc at the switch in the drivers door and there was NO POWER. In the rubber boot (between the car & door) I found the grey wire (with a pink stripe) was broken internally but the INSULATION WAS NOT!!!
Posted on Jan 05, 2009
SOURCE: no dome light on tacoma
The dome light gets 12 volt battery power at all times. The door switch, when the door is opened, allows the current to flow to ground, and completes the circuit. The door switch allows the ground to be made. Measure for 12 volts at the wiring connector, and measure for direct short at the ground wire, with the door open. The Ground wire is white with a black tracer.
Posted on Feb 27, 2009
I had the same problem to the T. I look online for all the same solutions and I can only tell you what worked for me. Actually what I think worked, HAHA! I went out to my truck and unplugged both battery terminals from battery and placed them together to supposedly reset the electrical system, "so I was told." After this for about 20 min or so, I went back out and in this order; re-installed positive terminal followed by negative terminal to battery. After this I checked locks and windows and surprise they worked. I've seen a lot of people say that all they did was wait and they worked later, so maybe it was that and not what I did, but who cares, they work now. Give it a shot and if it works for you, GREAT let me know, I HATE CHEVY CAUSE OF THIS......they wanted me to pay for a stupid diagnostic before they would help me........well screw you I fixed myself. LATER
Posted on Mar 06, 2009
I had the same problem with my 2005 dodge ram 3500 and found the wires were being pinched that run through the rubber boot on my right rear door. I had this fixed by dodge but there splice didn't last, so I took some 16ga wire and spliced it into the wire that operates the power door lock on that side and it fixed the problem. Dodge service shop did a sad job of splicing the wires back together by twisting the wires together and tape and wire broke.
Posted on Mar 24, 2010
Tips for a great answer:
Mar 19, 2014 | 2004 Jeep Grand Cherokee
Mar 11, 2014 | 2004 Dodge Ram 1500
Dec 16, 2010 | 2004 Jeep Grand Cherokee
Oct 08, 2010 | 2004 Jeep Grand Cherokee
Jul 31, 2010 | 2004 Ford Ranger
Mar 09, 2010 | 2004 Jeep Grand Cherokee
Jan 14, 2010 | 2004 Jeep Grand Cherokee
Mar 15, 2009 | 2004 Jeep Grand Cherokee
Feb 26, 2009 | 2004 Toyota Tacoma
Dec 29, 2008 | 2004 Jeep Grand Cherokee
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: