Question about Dodge Caravan
Cranks over getting fuel and spark but wont start
It is worth checking the cam belt is turning the cam shaft and then carreing out a compression test
Posted on Dec 31, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes It does. There are (or should be) toggle switches to reset security alarm. However, the ignition hot lead passes through the security relay contacts. This relay may be the culprit, in that if it does not pull when ignition key is turned; The start relay will not pull disabling fuel pump and spark.
Posted on Dec 10, 2009
You pinched the fuel line????
If you crank for too long to start the car, the engine will "flood", this is why the plug was wet. It had too much gas and wouldn't start.
Pull out ALL plugs and dry them off.
HOLD your gas pedal to the floor and crank.
This will stop gas from entering the engine.
you need to get that extra gas out beofre it will start.
If you have so much gas in there you can do damage to your engine!!
Now after a few crnaking attempts with your foot to the floor, take your foot of the gas pedal and try to start it again.
But remember if it doesn't start in 3 tries, you need to do the pedal to the floor once or twice to remove the excess gas.
When you crank the car to start it sprays gas into the engine, even if it won't start. So it very easy to "flood" the engine, and then you'll have a hard time to get it going!
Posted on Jan 08, 2010
Tips for a great answer:
Feb 21, 2016 | 2005 Chrysler Town & Country
Oct 25, 2015 | 1996 Ford Explorer
May 20, 2014 | 1997 BMW 328
Mar 01, 2014 | 1991 Ford Festiva
Jan 21, 2014 | Suzuki Grand Vitara Cars & Trucks
Nov 28, 2012 | 1993 Eagle Talon
Jan 16, 2012 | 1997 Dodge Neon
Apr 26, 2009 | 1988 Oldsmobile Delta 88
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: