Question about Cars & Trucks

Open Question

Carburetor solex diagram

Prewar solex with slide enricher details wanted to overhaul the carby on my 1937 BSA car.similer to lanchester

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: Vacuum diagram for 4A-F engine

hmmmm... im not expert in these kind of problem but... try to replace the diagram? it is possible?

Posted on Jun 19, 2008

  • 98 Answers

SOURCE: 1988 daihatsu charade carburetor

If we are talking the three cylinder CB23 engine the mixture screw is hard to get to and has an anti tamper shroud to stop prying fingers.

The Aisan carby is pretty reliable and problems with them on these engines is usually due to improper vacuum hose connections, or improperly adjusted idle, fast idle and deceleration screws.

A/F ratio is around the standard 14.7, but being a carby you will not get consistent mixtures because the jets sizes are fixed . On an EFI engine you can control the fuel flow, but not so with jets.

If you do decide to give your carby a birthday make sure you only buy the Daihatsu genuine, because the after market units have issues with quality. The minor rebuild kit part No 0421287704000 and the major overhaul kit with plunger, needles, gaskets, clips, etc is part No 0421187729000.

If it was me I'd be concentrating on the hoses, the PCV valve, contact points in the dizzy and better spark plugs first. If you want much better idling and a bit better pull get an electronic dizzy and coil from a G200 series Charade.


Posted on Sep 07, 2008

  • 1 Answer

SOURCE: Carburetor Tuning Mitsubish.

As far as i know, original stock carburetor for Lancer 1989-1992 engine 4G15 12 valve is Aisan Variable Venturi. It have 3 screws :
- air-fuel mixture screw
- main jet adjusting screw
- idle adjusting screw

and here's the document you may need :
http://www.mitsubishi-motors.kiev.ua/info.php?id=20
http://www.lilevo.com/mirage/

Good luck !
Winz

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I find the carburetor for hyundai accent 99model 1.3. Kit or new please help


hyundai spares departments
e- bay
kits from carby overhaul shops

Mar 25, 2017 | 1999 Hyundai Accent

1 Answer

I am looking for a carburetor kit for 302V8


you have to be specific as to carby make , model cubic ft capacity etc to get a kit
try e-bay carby kits for the make or find a carby overhaul shop in your area and get the kits from them

Sep 24, 2016 | Cars & Trucks

2 Answers

What would cause 1976 115hp V4 johnson outboard motor to use alot of fuel and spit and sputter?...also isn't there supposed to be a air filter over the carburetor?


The float may be stuck and flooding the engine. It definitely should have an air filter. Choke may be sticking closed causing a way too rich issue.

May 22, 2016 | Cars & Trucks

1 Answer

Looking for a carby diograme for a 18r celica


If they sent you the wrong diagram, then that's probably also the wrong kit - do the gaskets match up?

Worst case, you could use a different carburetor on that car... or if you're ingenious, you could make your own rebuild kit for the carburetor you have.

Aug 05, 2014 | 1977 Toyota Celica 1.8

1 Answer

HOW DO I REASSEMBLE A SOLEX H30/31 CARB


try going on line for solex carbys --select your model and see if there is a pdf down load of the service manual

Oct 07, 2013 | Cars & Trucks

1 Answer

Carb overflowing on 1990 vw polo


Pull the carburetor off and rebuilt it, the float is stick or the fuel inlet valve is defective. The carb kits come with full rebuilding instructions, but if you have never done a carby overhaul it is best left to a professional.

Oct 01, 2012 | Cars & Trucks

1 Answer

Solex h32/34 pdsi-3


Go to the parts store and order a rebuild kit,it will have a break down of the carburetor in it,and the adjustments

Apr 21, 2010 | 1978 Chevrolet Chevette

4 Answers

Carburetor Tuning Mitsubish.


As far as i know, original stock carburetor for Lancer 1989-1992 engine 4G15 12 valve is Aisan Variable Venturi. It have 3 screws :
- air-fuel mixture screw
- main jet adjusting screw
- idle adjusting screw

and here's the document you may need :
http://www.mitsubishi-motors.kiev.ua/info.php?id=20
http://www.lilevo.com/mirage/

Good luck !
Winz

Mar 23, 2009 | 1992 Mitsubishi Mirage

1 Answer

1988 daihatsu charade carburetor


If we are talking the three cylinder CB23 engine the mixture screw is hard to get to and has an anti tamper shroud to stop prying fingers.

The Aisan carby is pretty reliable and problems with them on these engines is usually due to improper vacuum hose connections, or improperly adjusted idle, fast idle and deceleration screws.

A/F ratio is around the standard 14.7, but being a carby you will not get consistent mixtures because the jets sizes are fixed . On an EFI engine you can control the fuel flow, but not so with jets.

If you do decide to give your carby a birthday make sure you only buy the Daihatsu genuine, because the after market units have issues with quality. The minor rebuild kit part No 0421287704000 and the major overhaul kit with plunger, needles, gaskets, clips, etc is part No 0421187729000.

If it was me I'd be concentrating on the hoses, the PCV valve, contact points in the dizzy and better spark plugs first. If you want much better idling and a bit better pull get an electronic dizzy and coil from a G200 series Charade.


Sep 07, 2008 | 1988 Daihatsu Charade

1 Answer

Vacuum diagram for 4A-F engine


hmmmm... im not expert in these kind of problem but... try to replace the diagram? it is possible?

Jun 19, 2008 | 1988 Toyota Corolla 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...