Question about 2005 GMC Yukon Xl Denali

2 Answers

Rear led brake light broke, replaced but new not working

Read led brake light was busted and had water in it. Replace with new, connection was the same but doesn't work. Can't find a fuse that it relates to..any ideas?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 127 Answers

YOU MIGHT WANT TO TRY TESTING THE TRAILER PLUG FUSE SOME OF THE THIRD BRAKE LIGHTS WORK OFF THAT FUNCTION. IF THAT DOES WORK TEST THE PLUG FOR POWER BEFORE THE PLUG, IF YOU HAVE POWER THAN IT IS IN THE PLUG, IF YOU DONT THAN CHANCES ARE IT IS IN THE FUSE BOX TEST ALL FUSES UNDER DASH AND UNDER THE HOOD.

Posted on May 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 253 Answers

In the dash fuse box, check the fuse that says CHMSL Good Luck

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 Trailblazer lower taillights not working upper work fine.


With the condition of the screws you should check to make sure there is a good connection to the lower bulbs for both power and ground.

Dec 02, 2016 | 2004 Chevrolet TrailBlazer

1 Answer

Brake lights not working but running lights & turn signals work already changed brake switch


check all fuses using a test light or volt meter if they are all good test for voltage at brake light connection if you have voltage in and out of switch test for voltage at rear light sockets with someone holding foot on brakes if voltage is present replace bulb or socket if no voltage is present a wire between switch and socket is broke . but that is very rare.a fuse is usually the problem dont just visually inspect them

Jan 18, 2013 | 2002 Ford Explorer

1 Answer

2002 beetle tdi check engine light on. computer said it was glow plug problem i replaced glow plugs and harness, light still comes on


replace brake light S.w , after you check rear brake light is ok , check injection pump have water in side with fuel .dis connect fuel line from injection pump use New fuel with injector cleaner .

Jul 04, 2011 | Volkswagen New Beetle Cars & Trucks

2 Answers

2000 VW Beetle ebrake needs adjusting, ebrake light goes off too


when you put the rear calipers back you didnt reset the e brake tensioner tight enough......hence the extra clicks.....

Jul 21, 2010 | 2000 Volkswagen Beetle

1 Answer

1999 GMC Envoy: replaced both GE 3057 lamps in left rear light assembly. Lamps both light. However depressing brake pedal does not initiate brake light. The righ rear brake light does work. The high mount...


The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. As for the left rear bulbs not working when depressing brake pedal, check the bulbs again for any spring that may be broken. If the bulbs are still good, make sure there is sufficient contact with the socket. If still not working, have someone check it out further.

Feb 15, 2010 | 1999 GMC Jimmy

1 Answer

One day coming from work my running lights cut off i checked the fuse and it was blown replaced and stays on for awhile then it blows, oh when i push on the brake pedal the running lights turn on when i...


you have water getting into one of your lights i would check all the bulbs and make sure none of them is busted if water gets into a broke buld it will cause a short in the lights

Feb 12, 2010 | 1991 Honda Civic

1 Answer

Brake lights don't work, the cruise does, all the


1. check the brake light bulbs. if busted replace. 2. check the brake light switch near the brake pedal. make sure the wires are fitted correctly. 3. check the fuse. if busted replace.

Dec 24, 2009 | 2001 Dodge Durango

1 Answer

How to replace rear brake light bulb in mitsubishi lancer'04


Open the trunk and inside you should see the rear plastic panel
of lancer's tail lights.Undo the screws using screw driver and
gently pull the assembly off.You should see 3 light bulbs.
Replace whichever is busted.

Nov 01, 2009 | 2004 Mitsubishi Lancer

3 Answers

1992 chevy s10 no brake lights or turn signals


Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Aug 02, 2009 | 1992 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...