Question about 1992 Toyota Camry V6

2 Answers

Location of Water Pump and Thermostat

My Toyota Windom 1992 3000cc G is running very hot and uses all water within a 10km drive, I am after information so I can find the Thermostat and Water Pump so I can try fix myself, cheersLeigh

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

The water pump run right of the pulley, it would be the pully with the hose running off it. then you can follow that hose to the thermostat housing.

Posted on May 20, 2009

  • tonycgriffin Sep 03, 2011

    just curious still, by any change do the timing have to be interferred with?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have a 92 windom 3.0g when warm cuts out y wld this b

Posted on Jul 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monte carlo blows cold air and overheats


It really runs hot within a minute of starting ?
An engine that runs hot in a few minutes is often having problems with the water pump or a blockage in the cooling system. The thermostat does not open until 195 degrees which takes 5 or 10 miles of driving.
During that time, the water pump should be circulating coolant in the block and the heater hoses.
A leaking head gasket should be putting extra pressure into the cooling system, and-or dumping coolant into the cylinders which would come out the exhaust pipe. But it should still take a few minutes for the engine to reach the boiling point of 240 degrees.

Mar 09, 2014 | 2004 Chevrolet Monte Carlo

1 Answer

Engine overheating


check for water coolant circulation. either you might have a clogged radiator or faulty water pump. to check the radiator after you run the engine for a while switch it off and try to find an easy access to radiator vents and touch all surface to see whether is all ho or if is some,then you remove it and send it for cleaning. as regards water pump,take the thermostat out put water in and start the engine follow the water circulation when you rev.if it rotates the water pump is working if is steady and coming upwards to over flow then the water pump is faulty. Also the other possibility is the matrix to be clogged..

Aug 30, 2012 | 1996 Ford Taurus

1 Answer

I have 85 toyota have changed water pump reader cap thermostat and still gets hot boils out water but when you put cold water it's ok for the rest of day sets over night start next day gets hot ag


did you let excess air out of radiator? after filling let it run for a few minutes with out radiator cap and make sure the water does not go down and serculates after thermostat opens, refill if needed
do you notice moister under vehicle in the morning ? possibly a gasket could be leaking.

Mar 30, 2012 | Cars & Trucks

1 Answer

Have a 1993 toyota paseo it keeps running hot change out radiator and house it does not have a tremostate could that be making it run hot


An explanation of the cooling system.
You start your car, it is cold at first. The thermostat is shut. Car warms up and raises the temperature of the coolant in the engine block. Thermostat opens up. Water from the radiator (cool) is exchanged for water from the engine block (hot) The cool water causes the thermostat to shut. This traps the hot water in the radiator so that it can be cooled down. The cool water that was exchanged for the hot water, now becomes the hot water because it is in the engine block. It heats up until it's temperature causes the thermostat to open again, exchanging cool water for hot water. If you have no thermostat, then you will never hold water inside your radiator. You have to hold it there to allow it to cool off, then it becomes useful to cool your engine. So, yes put a thermostat back in it, and please vote as to whether this was helpful or not.

Nov 23, 2010 | 1993 Toyota Paseo

2 Answers

1995 Toyota Camry 4 cylinder runs hot


Hi,

Firstly, ensure you have the required 'mixture' of coolant/water (must have required coolant).

Second, I would recommend you re-test all the cooling system sensors again (make sure they're within specifications), in case a new one is faulty.

Third, ensure the new thermostat was of the correct temp setting (they all differ), so that it opens at the required time. Most cooling systems operate within 90 - 100degC.

Fourth, make sure the radiator (and associated hoses) aren't blocked.

If your temp gauge is reading higher than normal, but NOT in the danger zone...then this can be considered normal (especially if you've replaced with new components) and nothing to be concerned about.

However, if the temp gauge IS in the danger zone....then this suggests the coolant is not flowing through the cooling system properly.

If all above components test ok, then it's possible your water pump may not be pumping enough volume.

Cheers,

Aug 16, 2009 | 1995 Toyota Camry

1 Answer

Location of the thermostat and water pump


Doesn,t sound like your thermostat or waterpump. Sounds more like your headgasket has gone.

May 20, 2009 | 1992 Toyota Camry V6

2 Answers

Overheating, antifreeze is okay ? thermostat vs water pump


does your have a grining noise? if not its the thermostat.

May 09, 2009 | 1996 Toyota Corolla

3 Answers

Engine running hot after thermostat installed


This is a Classic Sign of a Dead Waterpump.

Jan 22, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

936 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...