Question about 2004 Toyota Sienna

1 Answer

Left side door locks not working at all. Only manually or with key.

2003 Toyota Camry: Both left side doors will not lock with the fob or from the driver side lock button. Only way to lock the door is using the key or manually locking it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

When I first read this I thought Solenoid/Lock motor.
But as it's two doors on the one side I would look for a problem with wiring /connections at vulnerable points. Where the wiring goes from the front door to the body is a good place to start.

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Rav4 Lock System


You probably left a rod off the actuator

Jan 16, 2014 | Cars & Trucks

2 Answers

Locked the key and fob in trunk and the doors are also locked


break the window out then get it replaced at american glass for a great price. same day service

Jan 08, 2013 | 2006 Toyota Camry SE

1 Answer

I have a 2003 Toyota 4-Runner. The keyless alarm has stopped working on the drivers side door.


On the driver side the actuator is more likely the culprit,the linkage could of come off or the actuator just doesnt work

Mar 06, 2012 | 2003 Toyota 4Runner

1 Answer

Power door lock switch on drivers side malfunctions...


check fuses in panel uder left side of dash, chart in owner manual.

do locks work from passenger side?

with key fob?

With door keypad, if equipped?

May 20, 2011 | 2005 Lincoln Aviator

3 Answers

Toyota corolla verso 2007 . the central locking has stopped working


Toyota Corolla Verso - Central locking has just stopped responding


So you don't waste your time, here are some assumptions: -

1. When I press the key fob there is no sound of doors trying to lock/unlock and I know the key fob is fine.


Solution:


In this situation reset the alarm/locking system

Below is the procedure I followed to get the central locking working again: -

Open the passenger door, and look at the side of the dash board. There should be a triangular panel. Pull the panel off to reveal a small set of fuses(see the back of the panel for the fuse map). To power down the central locking you need to remove the Dome Light fuse, this is located top left. Second one down 7.5 amps. (if in doubt remove the top two 7.5 amp fuses I did)

When you remove the fuse(s) you will notice the interior light go out indicating you have powered down the system.

Now leave them out for at least 30 mins so any capacitors can discharge properly. (Be aware while the fuse is removed all central locking is disabled, so the other doors are open. I left the fuse(s) out over night with all the doors open but I don't recommend it, 30 mins should be fine)

After 30 mins replace the fuse(s) close all doors, and then try your key fob, hopefully you should here that satisfying locking sound.


2. When I press the key fob I hear the locking system trying to engage.

This could be a faulty door switch on any door including the boot, or there could be a dent in the inner door panel of any of the doors, usualy the rear doors due to the seat belt not retracting properly.

Solution:

Check all door switches for damage, and check inner panel for dents, just a small dent where the switch connects can be enough to not engage the switch. This will stop the central locking.

Use some kitchen roll wrapped in tape (as a makeshift pad) and tape to the inner door as a temp measure to engage the door switch. At least you can then lock the car.


Jan 04, 2011 | 2007 Toyota Corolla

1 Answer

When we use our key fob to lock the doors, i know we must use the key fob to unlock the doors to avoid the alarm from going off. Recently I parked in a parking garage at an airport (left key fob at home)...


You should be able to just unlock the door with the key, and even if the alarm is still going of try to start it the key should override the alarm.

Sep 15, 2010 | 2001 Toyota Tundra

1 Answer

Just changed battery in 2003 hundai elantra. alarm goes on when key turned. car won't start. alarm remote fob won't unlock doors


their is no doubt some way to reset it by turning the key so many times left and right ?? but try this ,and that put key in drivers side lock and lock and open three times slowly then open door on last attempt and try to start within 15 secs of opening the door lock ,also try the spare key in case the chip has fallen out of the key ??

Jun 06, 2010 | Hyundai Motor 2003 Elantra

3 Answers

Driver side door doesn't lock or unlock with the remote. The rest of the doors work fine.


Does the Driver side door lock and unlock from the lock switch inside? If not then you have a bad motor or bad connection to the lock/unlock motor inside the door.

Jan 08, 2010 | 2004 Toyota Camry

1 Answer

The driver side door of my 2003 toota camry will


remove the door trim there are screws holding it then once they are removed pull on the trim to remove it from the door,you will find that the little motor(actuator is not working or come adrift or wiring you will be able to see it with the door trim off.It may just be it needs replacing and has broken

Nov 10, 2009 | 2003 Toyota Camry

2 Answers

HOW TO PROGRAM 2003 TOYOTA CAMRY FACTORY REMOTES


1. Driver door open and unlocked. Key out of the ignition
2. Insert the key and remove 2 times in 5 sec.
3. Close and open driver door 2 times in 40 sec.
4. Insert the key and remove it again from ignition.
5. Close and open driver door 2 times in 40 sec.
6. Insert the key in ignition,
7. Close the door,
8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”)
9. Remove the key
10. Power lock will cycle to confirm
11. For add or rewrite mode within 40 sec of the confirmation,
A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds.
B. within 3 sec press “Lock” button for more than 1 sec and release.
C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice.

Sep 17, 2009 | 2003 Toyota Camry

Not finding what you are looking for?
2004 Toyota Sienna Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...