Question about 2002 Saturn VUE
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, a sidenote on how new your car is I would not worry about checking your transaxle fluid at the current time. You do the above following information to check your fluid and a good rule of thumb is to not work under a car while it's running. You can check the level by the old forefinger or pinky trick and if you can feel the fluid in the transaxle with your finger the level is fine. I would highly recommend however to check your fluid with your dipstick. If your vehicle does not have one you will have to run through the steps above and check the fluid with a mirror so you do not burn your fingers. I hopes this information solves your problem. Also a sidenote, dealerships have recalled your vehicle for a transaxle leak if yours is leaking do the check above and tighten the fill plug to a torque specification which can be found in a Haynes or Chilton Auto Repair Manual. If your vehicle is under warranty I would have your dealership correct this maintenance issue for you.
Wipe the dipstick clean with the rag or paper towel. Insert the dipstick back into the reservoir. Wait 3-5 seconds. Pull the dipstick straight out.
Posted on May 22, 2009
This is a outstanding question!!! The plugs or wires are not visible from the top or sides of the moter. You just can't see em'!!! You have to remove the large black plastic air intake. Then remove the intake manafold(not too hard to do) to access the spark plugs and wires. Also: After removing all the black plastic air intake stuff, you'll have to remove the coil pack (long black plastic thing that says "Ecotek" on top). The coil pack is removed by disconnecting the wire connector on the driver's side end and then removing four bolts. To lift off the coil pack, you'll have to pull upwards firmly and evenly from both sides, because the spark plug boots or wires are holding onto the spark plugs as well as the coil. With the coil pack removed, look down into the silver channels - there's the plugs. To remove, you'll need a plug socket head and a socket wrench with long extension. To replace the plugs, I use an extra or old spark plug boot to hold the plug and get it started turning into the engine threads. Good Luck!
Posted on Jun 09, 2009
SOURCE: 2002 Sayurn vue 3.0L
Under the intake manifold, it will need to be removed. Not too hard to do for the average diy but recommend buying a repair manual as a guide. you will need a 1/4" drive T30 torx socket with a long extension one of the bolts is hidden but the others are under the black cover on the top of the intake. you will also need to remove the coil pack held on with torx bolts. 8 or 10 inverted torx socket needed for that.
Posted on Aug 22, 2009
Tips for a great answer:
Sep 23, 2012 | 2003 Saturn L-Series L300
Jul 03, 2017 | 2006 Saturn Vue
Mar 07, 2011 | 2008 Saturn VUE
Feb 13, 2011 | Saturn Vue Cars & Trucks
Jun 07, 2009 | 2003 Saturn VUE
Mar 05, 2009 | 2008 Saturn Vue Hybrid
Dec 22, 2008 | 2003 Saturn VUE
Jun 18, 2008 | 2003 Saturn VUE
402 people viewed this question
Usually answered in minutes!