Question about Suzuki Cars & Trucks

Open Question

Suzuki f6a head bolt torque - Suzuki Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

chuck943
  • 783 Answers

SOURCE: Head bolt torque specs needed for 96 tbird 3.8

Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:

  1. 20 Nm (15 lb-ft).
  1. 40 Nm (30 lb-ft).
  1. 50 Nm (37 lb-ft)
Loosen retaining bolts one at a time two to three revolutions and retighten as follows:

Long bolts:
  • Tighten to 40-50 Nm (30-37 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Short Bolts:
  • Tighten to 20-30 Nm (15-22 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Here is a pic of the sequence
http://i253.photobucket.com/albums/hh43/chuck943/Headboltsequence38L.gif

Posted on Mar 19, 2009

polarcycle
  • 1392 Answers

SOURCE: head bolt torque spec

Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Posted on Aug 16, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the head bolt torque specs and sequence for a 2008 Suzuki reno 4 cylinder


well it's at alldata.com and at suzuki pitstop plus dot com.
here ill do that for you....
4 banger no displacement stated, now that is a challenge.


now the words..... USA car... 2.0L vin Z

Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B.




25750556-4duymjxl1ar05igx5z0a5r0z-5-0.jpg

Jun 17, 2015 | 2008 Suzuki Reno

1 Answer

What is the cylinder head bolt torque pattern on a 2007 suzuki forenza


post engine size. they use like 6 engines.
open hood, look up , see that EPA tag, it says right there.
no man on earth can guess engines. not ever.
(sure, rare exeptions, on 2 door sports cars)

Aug 20, 2014 | 2007 Suzuki Forenza

2 Answers

Head bolts pattern


torque? on and off , sequence?
there are head bolt seq. and cam cap seq,
and more. in the fsm. page 1D-45
1st remove seq.
4a3c0e21-e3a5-45cf-873f-ee36057315aa.jpg
now , install sequence.


84ea4a12-b50c-45a7-838e-63f7cbedd9c1.jpg


log in to alldata.com and see all the other details, on engine
assembly, the warnings, and special details.

May 13, 2014 | 2002 Suzuki XL-7

1 Answer

Head bolt torque f6a


PIGGYBACKER ASKS....4 YEARS LATER.
Bernardo wants more answers to this question
welcome to a USA forum
the country that has , zero F6a's
>no car started>
no year.>
see the world wide list here
not one here.
sorry...next time post country for a WIN/WIN

F6A - 657 cc (40.1 cu in) (65.0 x 66.0 mm). A four-cylinder version (the F6B) was also developed.

1990.03-1994.11 Suzuki Alto / Alto Hustle
1994.11-1998.10 Suzuki Alto HA/HB/HC/HD11
1998.10-2000.12 Suzuki Alto HA12 / Mazda Carol
Suzuki Cappuccino EA11R
Suzuki Cara
Suzuki Carry
1990.07-1998.10 Suzuki Cervo Mode CN/CP21S, CN/CP22S
Suzuki Every
1995-1998 Suzuki Jimny JA12

if it has turbo it can be DIFFERENT, SETTINGS.
AS CAN OTHER REASONS,!!!

Mar 11, 2013 | Suzuki Cars & Trucks

2 Answers

2006, suzuki forenza, 2.0, head bolt torque sequence?


what is the head bolt sequence and torque for a 2006 suzuki forenza.

May 01, 2012 | 2006 Suzuki Forenza

1 Answer

Torque specifications for cylinder head


Per Suzuki, tighten the cylinder head bolts to 25 Nm (18 lb-ft) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B. If this helps, please say so! Thanks! :-)


12_16_2011_4_57_00_pm.jpg

Nov 09, 2011 | 2004 Suzuki Forenza

1 Answer

Whats is te cylinder heads torque for suzuki aerio 2.3 lts


Hi! Please don't forget to rate! Thanks!



c17hydro_181.gif

Cylinder head bolt torque sequence-2.0L and 2.3L engines



Apply engine oil to the bolt threads and tighten the cylinder head bolts, in sequence, using the following 6 Steps:

  • Step 1: 38.5 ft. lbs. (53 Nm)
  • Step 2: 61 ft. lbs. (84 Nm)
  • Step 3: Loosen all of the cylinder head bolts
  • Step 4: 38.5 ft. lbs. (53 Nm)
  • Step 5: 76 ft. lbs. (105 Nm)
  • Step 6: Bolt M6 (bottom left of cylinder head) - 8 ft. lbs. (11 Nm)

May 12, 2011 | 2003 Suzuki Aerio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...