Question about 1991 Honda Civic

2 Answers

I need help installing new thermostat in my 91 accord ex?

I can't tell if it is in backwards!!!!

Posted by on

  • v_byndum May 19, 2009

    thank you

  • tony
    tony May 11, 2010

    you need to do what??????????????????

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

When you install the thermostat, the spring side should go towards the drivers side. And if the thermostat you put in has a brass Bleed Button Insert on it, it should face at 12:00 in the housing. Hope this helps.

Posted on May 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

The side with the hole goes down

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 accord ex still running hot after new water pump,hoses,termostat


Is it actually overheating or is your gauge just saying it is, did you measure the water temp to see if you have a bad temp sensor?
Have you started it from cold with the radiator cap off and let it warm up till water starts circulating so you can see that it actually is? New thermostat in backwards could cause it also.

Apr 15, 2015 | 1994 Honda Accord

2 Answers

I have a 91 Honda Accord EX the drivers side window will not go up or down all the other windows are working


Check the fuses, if they are all good then change the window motor on that one door!

Jan 10, 2011 | 1991 Honda Accord

2 Answers

I have a 91 honda accord ex, one of the front lug


If you undid the hub nut and retainer ring with clip it should tap off once brake caliper is removed.

May 15, 2010 | 1991 Honda Accord

1 Answer

Automatic Seat Belt. in Honda Accord 91 EX


check fuses or see if something might have got jamed in the track and also try movin the part where the seat belt moves back and forth to see if the motor is dying

Dec 12, 2009 | 1990 Honda Accord

1 Answer

My lifters are getting really loud on my 91 honda accord ex


All you need is to adjust the valve tappet clearance back to the original specification. It is a time consuming effort and require passion to do it. You need to remove the top engine cover, set timing belt to top dead centre then adjust intake & exhaust valve clearance one by one. Rotare the cranckshaft 180 degree and repeat the valve clearance,. I would suggest to leave it to the expert.

Jul 15, 2009 | 1991 Honda Accord

2 Answers

Car over heats


Have you tried flushing your cooling system?  It sounds like you might have some kind of blockage in there.  I had the same problem with my 89 civic and used a prestone flushing kit.  It's pretty cheap from AutoZone.  Give it a try and let me know if I can help you with anything else.  Thanks for an honest rating and for using FixYa.

May 19, 2009 | 1991 Honda Accord

1 Answer

How to remove a shift knob on a 91 honda acoord ex


theres screws on the back of the shift knob where you hand goes

Mar 11, 2009 | 1991 Honda Accord

2 Answers

Where & how to install thermostat in honda accord ex 1992


you need to follow the upper hose that lead from the radiator to the engine, there is two bolt that connect the thermostat housing to the block loosen the bolt using a 10 mm socket with ra-chet. Make sure that the engine is cool off before attempt to do this you will lose coolant but that's ok you will add the coolant when you finish replacing the thermostat. start the engine with the radiator cap off then add coolant slowly and cap it, then fill the reservoir up.

note the way you remove the thermostat that's the same way you will put the new one so pay attention when you remove the old one good luck.

Dec 17, 2008 | 1992 Honda Accord

3 Answers

91 accord lx starter cyleniod


Starter is not seated properly and is cocked sideways. Remove and reinstall, making sure it is fully seated

Jun 18, 2008 | 1991 Honda Accord

1 Answer

91 accord alt belt


  1. Apply a force of 100 N (10 kg, 22 lbs) and measure the deflection between the alternator and crankshaft pulley. Deflection: 10 - 12 mm (0.39 - 0.47 in)
NOTE:
  • On a brand-new belt, the deflection should be 4.5 - 7 mm (0.18 - 0.28 in) when first measured.
  • If there are cracks or any damage evident on the belt, replace it with a new one.
    1. Loosen the through bolt and adjustment locknut.
    2. Turn the adjusting bolt to obtain the proper belt tension, then retighten the nut and mounting bolt.
    3. Recheck the belt deflection.

May 28, 2008 | 1991 Honda Accord

Not finding what you are looking for?
1991 Honda Civic Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...