Question about 1997 Toyota Corolla

Open Question

How to change a 100 amp fuse in a 1997 toyota

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 48 Answers

SOURCE: Removing the 100 amp fuse link in a 1994 toyota corolla

the fuse link is bolted in from the two side in the fusebox.you have to un bolt the whole fusebox so you can raise it and if you look at the sides there are two side panels that can be moved down so you can get a socket or spanner on the two bolts apprx 10mm. undo them and raise the fuse out and put the new one in and tighten up the bolts again. hope this helps.

Posted on Apr 25, 2009

Ad
  • 160 Answers

SOURCE: HOW DO YOU GET TO THE 100 AMP ALTERNATOR FUSE TO

not taped in harness it is bolted into fuseblock on outside of fuse block are 4 little locks holding in part of fuse block using small screwdriver release locks by prying outwards while pulling up on 100 amp fuse when it has released enough it will expsoe the bolts holding in the 100 amp fuse one side is an 10mm the other is a 8mm MAKE SURE YOU DISSCONECT THE BATTERY 1ST

Posted on Apr 29, 2010

chargerhp
  • 813 Answers

SOURCE: where to get a 100 amp fuse for 1992 toyota camry

http://www.autopartswarehouse.com/search/?Ntt=fusible+link

Posted on Dec 26, 2011

SOURCE: How do you remove the charging system fuse in a 1997 Toyota 4Runner

Perfect Answer

I hope a lot of people read that

It is not a good idea to use any of todays
vehicles to jump each other

Use a separate battery pack designed for that
or a battery charger on boost

You can also ruin the electronics just being helpful
to someone

Posted on Nov 19, 2012

  • 256 Answers

SOURCE: how to remove 100 amp main fuse in 2006 toyota corolla

Remove the 2 bolts holding it in,

Posted on Dec 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bypass ignition switch to start 1997 my Toyota Avalon ki quit you turn it on no lights or nothing but plenty of power at battery


Check your am fuses. That and the alternator fuse. Had to replace those on a camry and then everything powered on. Should be like an 80 or 100 amp fuse. May look ok, but could be split so that power isn't flowing.

May 04, 2015 | 1997 Toyota Avalon

1 Answer

How do you remove the charging system fuse in a 1997 Toyota 4Runner


Perfect Answer

I hope a lot of people read that

It is not a good idea to use any of todays
vehicles to jump each other

Use a separate battery pack designed for that
or a battery charger on boost

You can also ruin the electronics just being helpful
to someone

Oct 21, 2012 | 1997 Toyota 4Runner

2 Answers

How remove f link from fuse box in 97 corolla


Hi. The fusible links are the big fuses located in the fuse box. The exact location of the fuses depend on the engine and on the version of the car. In 1997 Toyota built series
7 Corolla. At the end of 1997 Series 8 was introduced. in the year 1997 both models with different engines were distributed. There are up to 4 fusible links (big fuses ranging from 30 Amp towing protector to 100 Amps) See here.
Low amps fusible links are also in passenger compartment.
The fusible links are simply fuses and can get replaced using long nose pliers.

Below I have published the fuse diagrams covering Toyota series 7 (1993 to 1997) models.

The fusible links can be purchased here.
The site also includes schematics.

In case the car is a series 8 (late 1997), here service manual for series 8.

ginko_139.jpg

Here a fuse link for Corolla 1997, color may vary depending on amps, the one below is low amp current 30A, 100A is usually blue and 40A green, there may be black fuses with no color code:

ginko_140.jpg

Aug 27, 2011 | 1993 Toyota Corolla

1 Answer

Hi i connected the jump leads up to my 2005 mr2 backwards and blew the 100 amp fuse. i managed to piggy back a tempory 100 amp fuse in just to move the car and the car seemed fine. the problem is that i...


Get loose the fuse box, remove the lower cover, remove the 2 8mm bolts that hold the fuse,and replace it, do not let the car piggy backed for a long period of time is a little dangerous.

Dec 28, 2010 | Toyota MR2 Cars & Trucks

2 Answers

HOW DO YOU GET TO THE 100 AMP ALTERNATOR FUSE TO CHANGE IN 1998 TOYOTA CAMRY 2.2 LITER


not taped in harness it is bolted into fuseblock on outside of fuse block are 4 little locks holding in part of fuse block using small screwdriver release locks by prying outwards while pulling up on 100 amp fuse when it has released enough it will expsoe the bolts holding in the 100 amp fuse one side is an 10mm the other is a 8mm MAKE SURE YOU DISSCONECT THE BATTERY 1ST

Apr 21, 2010 | 1998 Toyota Camry

1 Answer

Removing the 100 amp fuse link in a 1994 toyota corolla


the fuse link is bolted in from the two side in the fusebox.you have to un bolt the whole fusebox so you can raise it and if you look at the sides there are two side panels that can be moved down so you can get a socket or spanner on the two bolts apprx 10mm. undo them and raise the fuse out and put the new one in and tighten up the bolts again. hope this helps.

Apr 25, 2009 | 1993 Toyota Camry V6

2 Answers

Elctrical can't get car into gear


check alt fuse link (under hood fuse block)

Mar 17, 2009 | 1997 Toyota Camry

1 Answer

I need to remove the 100 amp fuse on my 05 toyota tacoma


You need to pull the fuse box out, and loosen the fuse holder panel. This is harder than it sounds, trust me. The 100 amp fuse is bolted in, 10 millimeter bolt. Make sure that battery is DISCONNECTED when you do this.

Aug 03, 2008 | 2002 Toyota Tacoma

Not finding what you are looking for?
1997 Toyota Corolla Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...