Question about 2000 Volvo S40

1 Answer

Changing back break pads on volvo s40 2000 model

Need to get the back brake calapa back on the drivers side rear to get new shoes in

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Use a C clamp to push the caliper back in.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change rear parking brakes


Here's how to change brakes.Here's the disc.

Dec 29, 2012 | 2004 Chevrolet Impala

3 Answers

1994 LINCOLN CONTINENTAL


Hi Terry,
Please check out this Link : http://www.autopartswarehouse.com/featured/books_and_manuals/1461465620.html
Here you will find the details regarding your Car and how you can check and repair the breaks without taking it to a mechanic.
I hope this helps.....

Jun 02, 2008 | 1994 Lincoln Continental

1 Answer

Is there a certain way to change rear brake rotors. They seem to be frozen and will not come off. I did not see a set screw in the rotors like some of the new models have.


ok i have been doing the for 22 yrs..heres the prob...inside the rear brake rotors r ur parking brake shoes..there is either a rust lip the built up on the inside of the rotor causing the parking brake shoes to grab the rust lip when u try to remove the rotor..if this is the case u will also need to repalce the rear parking shoes and the parking brake shoe holddown spring kit since it will probably break when u have to pry the rotor off....or u maybe able to de adjust the rear shoes by the self adjuster...look on the back side of the other side of the brake rotor an u should see a over slot just below the control arm...if it there use a brake spoon or straight slot screw driver to de adjust the rear park shoes.move it up or down ..one way will tighten them the other way will loosen them...if ur rotor doesnt move at all take off the rear caliper an hit the back side of the brake rotor to knock it off

Jul 16, 2011 | 1998 Ford Explorer

1 Answer

I need my back breaks done. Im not sure if it needs break pads, drums, rotars, disks or what?


If you had listed make, model, and year, I would know what setup you have on the rear. First find out if it has disc brakes or drum brakes. Purchase the correct brake pads or shoes that fit your vehicle. Once you remove the old pads or shoes you will know if the rotor or drum needs turning or replacing.

Jul 12, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Asking which kind of brake in back rear driver makes a lot a nois


You have brake rotors and pads on the front. Looking on the rear axle if it looks like the front it will be rear rotor and pads. And if you cannot see the rotor or pads on the rear axle then you will have what is called rear drums and brake shoes. Hope this will help you.

May 20, 2010 | Cars & Trucks

1 Answer

Rear brake disc needs replacing


with car on stands use punch to remove pad retaining pins pull out pads can be tight remove 2 calliper retaining bolts move calliper away from disc remove disc retaining bolts remove disc check hand brake shoes and clean look for adjuster between shoes if it has one back it of some models just have hand brake cabel adjustment clean and fit new disc secure adjust hand brake shoes using screw driver through wheel bolt hole clean refit calliper slowley push back calliper pistons fit new pads refit retaining pins do other side pump up brake pedal check and adjust handbrake if neededcheck brake fluid level

Oct 20, 2009 | 2001 Volvo S80

1 Answer

Parking brake efficency too low


The parking break is a stand alone cable that can be adjusted if you climb under the vehicle. depending on your parking break location in the cab will help you better locate it under the car IE if you set your parking brake using a handle in the center of the vehicle cab, the wire is close to center under the vehicle, if you use a handle or foot pedal its on the driverside of the vehicle and Y's off to the passager side and driver side rear break

EX:
/
-------------------------------------<
\

follow the cable and you will find the adjuster bolt, just tighten it to take up slack in the cable, if there is no slack you will increase the efficency of the parking break.....Dont over tighten it though cause this can cause drag in the rear breaks and shorten the lifespan of the break shoe or pad








Sep 27, 2009 | 2005 Volvo XC90

1 Answer

Changing front and rare break pads in hyundia excel


this front::
  1. Raise and support vehicle, then remove wheel/tire assembly.
  2. Remove lower bolt and caliper assembly. Position assembly aside using suitable wire.
  3. Remove brake pads and shim.
  4. Bottom piston in caliper using suitable tool.
  5. Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
this for rear::

1. Raise and support vehicle, then remove wheel/tire assembly.
  1. Remove axle nut, then the hub and drum assembly.
  2. Remove end shoe springs, cylinder and hold-down spring.
  3. Remove shoes and adjuster as an assembly.
  1. Reverse removal procedure to install, noting the following:
    1. Apply suitable grease to backing plate shoe contact surfaces.
    2. Install shoe hold-down pin, then assemble return spring with the pushrod shortened.
    3. Pull parking brake lever fully upward. Repeat process several times.

Jun 04, 2009 | 1994 Hyundai Excel

2 Answers

Rear passanger side brake locks up when stopped


  1. Possible air in Driver side rear giving pass side upper hand so to speak
  2. Has drum ever been wet with brake fluid?
  3. driver side REAR self Adjuster rusty and not working properly
  4. Sticky Wheel cylinder at rear driver side

Jan 13, 2009 | 1995 GMC Sierra C1500

Not finding what you are looking for?
2000 Volvo S40 Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...