Question about 1992 GMC Yukon

1 Answer

ABS light always on

We have a 2002 Yukon and the ABS light stays on all the time and they say it is some type of sensor that will cost $1500 to repair. Have you ever heard of something like that?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 1,889 Answers

This is insane! why so much money?! To start with: an abs system is the same as a record turntable placed on it's side and located behind your wheel(s) behind your brake drum(s) On the edge of this turntable (disk) a series of squares or, stroboscopic lines are inscribed a small infared laser-type sensor (reads) the speed of the disk and relays it to the abs computer.
Pretty simple huh? so clean your disks and, your
sensor's lens and reset your abs computer.
hope this helps and,keeps your money in your pocket where it belongs.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2003 GMC Yukon XL 1500 - ABS & Traction Control lights come on every time I drive over a bump in the road


id be looking at a wheelspeed sensor with a wire about to break off. or a bad connection possibly. plug and unplug them all at least twice to see if the issue goes away..cheap to try.

Jul 03, 2017 | 2003 GMC Yukon XL

1 Answer

My 2003 yukon xl is cutting off in the middle of the street, it seems like the battery won't stay charge, the ac only works on defrost and it blows very low. after replacing the brakes the abs lights...


if you think its a alternator not charging battery properly heres the specs. when vehicle is off, at battery there should be at least 12.6 volts, when it is running, at battery there should be at least 14.2-14.7 as for the low fan speed. there is not enough of volts to run it properly. if abs light is on, its most likely a bad speed sensor or a broken or bad wire to the sensor. go to auto-zone and tell them you need to scan for a bad abs sensor, they will do this for free of cost. good-day !

Aug 16, 2011 | 2003 GMC Yukon XL

1 Answer

1999 Chevy Silerado ABS & Brake warning lights come on and stay on Restart Engine and lights disapear sometimes during a drive the will both reapear (alway all 3 indication lights) the ABS and...


The only real way to find out what is going is to have a diagnostic scan. You can go to auto zone and have it scanned for free but im pretty sure their scanners are for motor only, not abs. You need an abs scanner. Any garage should be able to scan. It could range in cost from$35 to$100 for a scan. Abs light could be a as simple as wheel sensor. The brake warning concerns me though. I would check your brake fluid. When was the last time you had new brake pads put on. You may have worn the pads so low, you have run down the brake fluid.i wouldnt drive until i found out what is going on with the brakes. any other help needed, just ask.

May 20, 2011 | 1999 Chevrolet Silverado 1500

2 Answers

The ABS warning light stay's on all the time, only time it is off is when the vehicle is shut off. 2002 Chevy silverado 4x4


90% of the time its because of dirt/mud build up on the sensor if you need a quick fix just take this thing down to the local self wash and power was the inner wheel well behind the tire . do a little research on the location that way you'll know where they are before hand.

Mar 09, 2010 | 2002 Chevrolet Silverado 1500

1 Answer

Jaguar x-type abs light on


You have a faulty sensor.You will have to get a diagnostic check to findthe faulty one.

Dec 28, 2009 | 2002 Jaguar X-Type

3 Answers

Gmc yukon has the abs & parking brake light


you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem

Nov 26, 2009 | 2001 GMC Yukon Denali

1 Answer

ABS Brakes come on when stopping all the time. Is there a sensor?


The ABS system always is engaged when the brakes are applied. If you are talking about the ABS light coming on then it is a little bit of a different story. If the light has come on at all there will always be a code stored. I would take it to a shop that has a scan tool to read ABS lights and ask them what the computer is saying. This is the only true way to get this problem fixed.

Jun 10, 2009 | 2002 GMC Yukon XL

1 Answer

2002 Yukon XL


i serviced my 2004 yukon for abs light came on they told me it was the right front abs speed sensor wire , which is sold sepratly or with wheel hub cost$ 300 or 57$ for just sensor wire, i did all brakes changed sensor and for awhile the stayed off but comes on and at about 20 mph it turns off ?

Jan 25, 2009 | 2002 GMC Yukon XL

2 Answers

ABS Pump wont shut off


go to www.modulemasters.com

The dealer will charge you $1300 - $2000. Contact Module Masters. They are great to deal with. You have to ship it to Moscow, Idaho. It cost me about $15 to ship it (with box, packing, and insurance at a UPS store). They charged me $130 to rebuild it and gave me a 5 year warranty. It cost $8 to ship it back. To in total, it cost me $153....totally turn-key.

Jun 30, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
1992 GMC Yukon Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...