Question about 2005 Ford Expedition

Open Question

2002 mercury mountaineer codes p0316 p0301 - 2005 Ford Expedition

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
samtoler
  • 666 Answers

SOURCE: f150 2002 4.2 eng codes:

1400 is dpfe, 1151 is an 02 sensor code, 1131 is also 02s11 code, P0316 = Engine Misfire Detected on Startup (First 1000 Revolutions)
Po301 Cylender 1 misfire, p0174 lean condition bank 2, And p0171 is lean bank 1. Either this is in need of a whosale of repairs or you have computer issues, From looking at the codes i would first do a complete tune up, Including wires, And inspect for a vacume leak before replacing any 02 sensors..

Posted on Jun 14, 2010

Ad
  • 149 Answers

SOURCE: engine lite on code p0316 &p0301

p0316
misfire detected during startup-first 1000 revolutions

p0301
cylinder no.1 misfire detected

Posted on Aug 23, 2010

  • 170 Answers

SOURCE: code p0301 and p0316

P0301 - Cylinder 1 Misfire Detected
P0316* - Engine misfire detected on Startup (First 1000 Revolutions) Could be a Bad Coil or bad spark plug or a bad wire on cylinder one. Check the plug and the wire first then move to the coil. Good Luck.

Posted on Sep 23, 2010

pwrxt_cb
  • 60 Answers

SOURCE: 2004 ford explorer sport tracs cylinder 1 misfire

The coil-on-plug. These are common to fail. #1 is easy to get to, all you need is a 7mm socket, an extension, and a ratchet. P0301 tells you that cyl.#1 is not firing everytime it is asked to, P0316 means that during the first 1000 revolutions when you start your truck, there was a misfire. To be sure about the coil, swap the coils with the one next to #1. Clear the codes and wait for the codes to return. If the code P030_ shows up, (P0302 if you swapped it with #2, P0303 for #3, for example) Then remove that coil and get you another!

Posted on Feb 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to know what code P0308 and P0316 means


P0316 Misfire at Startup P0308 Code Cylinder 8 Misfire

These links will explain the codes. The problem could be something as simple as water in the gas, or the car may need a tuneup if it has been several years since the last tuneup.

May 08, 2014 | 2004 Mercury Mountaineer

1 Answer

02 mercury sable P0301 and P0316


You have a miss in the number 1 cylinder during the first 300 revolutions and then during the next 1000 rpm it is still missing. Depending on the engine type you can have a bad plug, plug wire, or coil if it has a coil on each plug. You can also check for the injector ground wire and connector for #1 plug.

Mar 10, 2014 | 2002 Mercury Sable

1 Answer

I'm getting codes, p0301 and p0316. I replaced the spark plugs and cylinder 1 spark plug was wet when i removed it. What could it be?


Code 301 is a cylinder miss on cylinder one, and 316 is a miss detected during startup which is probably caused by code 301.
If the plug is firing, you could have an injector problem on that cylinder.

Apr 22, 2013 | 2002 Mercury Sable

1 Answer

2004 ford explorer sport tracs cylinder 1 misfire


The coil-on-plug. These are common to fail. #1 is easy to get to, all you need is a 7mm socket, an extension, and a ratchet. P0301 tells you that cyl.#1 is not firing everytime it is asked to, P0316 means that during the first 1000 revolutions when you start your truck, there was a misfire. To be sure about the coil, swap the coils with the one next to #1. Clear the codes and wait for the codes to return. If the code P030_ shows up, (P0302 if you swapped it with #2, P0303 for #3, for example) Then remove that coil and get you another!

Feb 01, 2012 | 2004 Ford Explorer

1 Answer

My car is cutting off every time im going under 1000rpm. mercury sable 2002. codes were p0301 p0302 and p0316 until i changed crank sensor and spark plugs now it says p0316 p0305 p0306.. whats going on?...


Hi

P0305 is misfire in cylinder #5.
P0306 is misfire in cylinder#6.
P0316 is misfire on start up.
Have the plugs on those 2 cylinders, and the 2 fuel injectors checked, also check for spark from the coil on those 2 plug wires.

Please get back to us if you have further query or else please accept the solution.

Thanks for contacting fixya.com



Sep 05, 2011 | 2002 Mercury Sable

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

2 Answers

What is code p0316 & p0302 on my ford sable


P0302 IS MISFIRE ON# 2 CYLINDER P0316 I THINK IS KNOCK SENSOR BUT IM OLNY 90% ON THAT

Oct 15, 2010 | 2002 Mercury Sable

2 Answers

Code p0301 and p0316


P0301 - Cylinder 1 Misfire Detected
P0316* - Engine misfire detected on Startup (First 1000 Revolutions) Could be a Bad Coil or bad spark plug or a bad wire on cylinder one. Check the plug and the wire first then move to the coil. Good Luck.

Sep 23, 2010 | 2002 Ford Explorer Sport Trac

1 Answer

Engine lite on code p0316 &p0301


p0316
misfire detected during startup-first 1000 revolutions

p0301
cylinder no.1 misfire detected

Aug 23, 2010 | 2002 Ford Taurus

1 Answer

I am facing problem with my 2002 mercury sable car. Dmv rejected my inspection and they gave me codes like P0304P0305 and P0316. Check egine light is coming on. I dont know what the problem is exactly. Can...


P0304 cylinder misfire # 4, P0305 cylinder misfire #5 & P0316 cylinder misfire detected on startup. Start with easy first. Spark plugs &/or wires.

Jul 03, 2010 | Cars & Trucks

Not finding what you are looking for?
2005 Ford Expedition Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...