Question about 2006 Saturn ION

Open Question

Can I use one jacking point to lift both front wheels at the same time on 2006 Saturn Ion

Can I jack both front wheels at the same time from a central jacking point?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: clock

Make sure the radio is on to set the clock.  Then with the radio on, press the clock button. The field you will be setting will flash (hour, ect).  Just turn the tuner dial while this is flashing.  Then when you have it set how you want, press the clock button again. The next field will flash and you do the same thing.  When it is all set, just don't touch anything.  It will take the new info you have put in after several seconds.   Need a Rocket Scientist degree for this clock!

Posted on Feb 05, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 2006 saturn ion front end noise...wheel bearings?

Yes you can do this; the bearings are sealed unit hubs; very easy the cost is only about $70 each at an auto parts store. once you look at them you'll know how to do this.

Posted on Apr 21, 2009

Fixitman909
  • 430 Answers

SOURCE: I have a 2006 Saturn Ion and the check engine

try resetting pc disconnect neg cable for 5 mins and retry gl

Posted on Aug 29, 2009

  • 484 Answers

SOURCE: Cant find fuse box on the 2006 Saturn Ion

The two boxes are located (one; engine management and lighting circuits) under the hood by the battery and (two; in-cabin accessory and lighting) under the dash by the driver's legs.

Hope this helps,
matt

Posted on Sep 16, 2009

Molson02536
  • 3854 Answers

SOURCE: does a 2006 saturn ion 3 have a timing belt or a

2006 Saturn Ion Quad Coupe 2dr Cpe Ion.1 Base Manual
2.2L DOHC SFI 16-valve L4 Ecotec engine
Steel timing chain

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Saturn Ion and the steering wheel has some slop in it how do I fix it or what could be wrong


The steering gear box has an adjustment screw on the top cover. Loosen the lock nut and turn the screw clockwise until the slop is reduced. Jack the front end up so both wheels turn freely. Push the wheel right and left while watching the suspension components. If they move up and down. The control arm and ball joints need replacing. Have it done at a good shop that does alignments.

Nov 29, 2016 | 2003 Saturn ION

1 Answer

Why am i hearing a whistling noise coming from my front wheel?


It could be what is called the squeal warning on the front disc brake pads. If so, it indicates the pads are worn to the point that they should be replaced before they begin to do damage to the rotors. Pretty easy for someone who knows how to jack the car up, remove the wheel and take a look how much brake pad is left.

Aug 18, 2014 | 2006 Saturn ION

3 Answers

Cant find jacking points


if you can find the jack there should be a picture on it, one spot is usually behind the front wheels just inside the sill(pinch weld), its like a double layer of steel(reinforced).

Nov 10, 2012 | 2009 Hyundai i30 1.6

1 Answer

Have a 2007 saturn vue with a loud humming in the front. how do you tell which wheel bearing it is that is bad.


jack up front of the car and push and pull on wheel if there is play then its the bearings

Jul 14, 2011 | 2006 Saturn Vue

1 Answer

I have a 2003 saturn ion can i flat tow it behind my rv someone said the trans still works and will heat up


It is not advisable to tow an automatic. All kinds of things happen like pumping out oil or parts running dry. If you need to tow it the driving wheels must be lifted off the ground or the drive shaft/s disconnected. Towing it on a Mobi-jack will be a viable alternative.

Jul 12, 2011 | Saturn Ion Cars & Trucks

2 Answers

Where do I put the siccor jack to life the car so I can change the front wheel?


In the grove in the middle of your framenotch go's into notch in jack good luck to ya.

Mar 30, 2011 | 2002 Suzuki Vitara

2 Answers

Lift points on chassis for a floor jack


I use exactly the same the jacking points as I would use with the factory scissor jack. They are reinforced to handle the load. You'll find these point marked with triangle stamped into the rail and in your owner's manual.

Dec 14, 2009 | 2008 Saturn Aura

2 Answers

Where is jack locations


I assume you are asking where it is safe to jack the vehicle with the factory provided jack. These locations are in front of both rear wheels there are jacking points you can see because they look like re-enforced parts of the body. The same points are behind the front wheels and will look the same. If you are looking for where the jack should be located in your car it should be in the trunk under the spare tire.

Nov 06, 2009 | 1998 Ford Escort

1 Answer

How do I replace the struts and shocks


well the rear are easy take the wheel off,,,put a jack under the rear axle on the side you are doing and put tension on the jack to jack it up alittle,remove the 21mm lower shock bolt and the 18mm top shock bolt and release the jack,then remove shock and reinstall new,,,they are easy do the same fo rthe other side and then go to the front,,,take off wheel,,, no jacking up required for front struts,,,remove the two 18mm nuts and bolts that connect the strut to hub and then 18mm nut the holds the sway bar end link to strut,,may may need a vise grip on the back side of the end link to hold it from spinning as they rust fast,then open the hood and hold the strut with one hand thru the wheel well and take the top strut mount nut off under the hood 18mm,watch because the strut will fall in the wheel well so hold it,i would advise using a air gun to do this all other wise youre gonna have a hard time to remove the sway bar end link nuts

Oct 14, 2009 | 2003 Saturn ION

1 Answer

The function that rsiaes and lowers the vehicle doesn't work,


Lifting

The following instructions must be carried out before raising the vehicle off the ground.

  • Use a solid level ground surface.
  • Apply hand brake.
  • Select 'P' on automatic gearbox selector.
Note: If the propeller shafts are to be removed, reference must be made to the relevant operation. To avoid damage occurring to the under body components of the vehicle the following jacking procedures must be adhered to.

DO NOT POSITION JACKS OR AXLE STANDS UNDER THE FOLLOWING COMPONENTS:
  • Body structure other than approved jacking points
  • Bumpers
  • Fuel lines
  • Fuel tank
  • Brake lines
  • Front or rear suspension arms
  • Transfer box
  • Steering linkage
  • Front or rear differential units
  • Engine sump
  • Automatic gearbox
NOTE: For certain repair operations, it may be necessary to support the engine under the sump. In this case, a block of hardwood or a rubber block should be positioned on the jack lifting cup to protect sump. Vehicle jack
The jack provided with the vehicle is only intended for use in an emergency, for changing a tyre. DO NOT use the jack for any other purpose. Refer to Owner's Handbook for vehicle jack location points and procedure. Never work under a vehicle supported solely by the vehicle jack.

Hydraulic jack
A hydraulic jack with a minimum 1500 kg, (3,300 lbs) load capacity must be used.

WARNING: Do not commence work on the underside of the vehicle until suitable axle stands have been placed in their correct position. Always chock the wheels when jacking. The handbrake may be ineffective when the wheels are off the ground. Raising and supporting the vehicle
To assist in raising the vehicle, jacking points are provided as shown in the following illustrations.

Raising the front of the vehicle
Apply handbrake, select 'P' on automatic gearbox selector and chock rear wheels.
Axle stand positions - front

Raise vehicle to enable axle stands to be positioned under, either, the front sub-frame, or the recommended customer jacking points.

CAUTION: Place a piece of hardwood or a rubber block between each axle stand and the jacking point to avoid damaging the body / component. If the propeller shafts are to be removed, select NEUTRAL in the main gearbox.
Carefully lower jack until vehicle sits securely on axle stands.

WARNING: Always support the vehicle on axle stands when using a jack.
Before commencing work on underside of vehicle re-check security of vehicle on stands.

Reverse procedure when removing vehicle from stands.

Raising the rear of the vehicle
Select 'P' on automatic gearbox selector and chock front wheels.

WARNING: Always chock the front wheels when jacking the rear of the vehicle.

Axle stand positions - rear

Raise rear of vehicle to enable axle stands to be positioned under the rear sub-frame. Alternatively, the axle stands may be positioned under, either, the recommended customer jacking points or the front mounting points of the rear sub-frame.

CAUTION: Place a piece of hardwood or a rubber block between each axle stand and the jacking point to avoid damaging the body / component. If any damage occurs to the washers on the front mounting points of the rear sub-frame, then the washers must be replaced. Carefully lower jack until vehicle sits securely on axle stands.

WARNING: Always support the vehicle on axle stands when using a jack. Before commencing work on underside of vehicle re-check security of vehicle on stands.

Reverse procedure when removing vehicle from stands.

Wheel-free lift
The following warning must be read before attempting to lift the vehicle.

WARNING: The vehicle cannot be supported safely in a wheel-free condition using the wheel-free facility of a four post ramp, and under no circumstances must this method be employedA wheel free condition may only be achieved on a four post ramp by raising each end of the vehicle and positioning axle stands beneath the recommended customer jacking points.

CAUTION: Place a piece of hardwood or a rubber block between each axle stand and the jacking point to avoid damaging any components. If the propeller shafts are to be removed, select NEUTRAL in the main gearbox. WARNING: The front and rear suspension lower arms must NOT be used as lifting / jacking points. Alternatively, support the vehicle on an approved two post lift with the arms of the lift beneath the recommended customer jacking points.

CAUTION: Place a piece of hardwood or a rubber block between the lifting equipment and the jacking points to avoid damaging any components. If the propeller shafts are to be removed, select NEUTRAL in the main gearbox.

Oct 04, 2009 | 2003 Land Rover Range Rover

Not finding what you are looking for?
2006 Saturn ION Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...