Question about 2006 Jaguar S-Type

Open Question

Readout on scanner p050b - 2006 Jaguar S-Type

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do the RPM gauge supose to move up on dash when cranking?


The tach readout is controlled by software in the Instrument cluster (IC) based on the values sent from the VCM/PCM. The readout on your scanner should show the correct rpm values (120 to 240 is wrong). Therefore, if the engine is running normally, the computer is probably not sending the correct values to the IC, but the crank sensor is OK.

Jan 01, 2017 | GMC Cars & Trucks

1 Answer

Brake pedal hard halfway hard to stop


Not sure why you have scanner readout, but the most likely culprit in the hard brake pedal/hard to stop category would be a faulty power brake booster.

Oct 09, 2015 | 1995 Dodge Grand Caravan

1 Answer

Fuel economy readout quit working along with trip meter and odometer


Check fuses first if good remove battery cable on the positive side for a min or two, then check.
If still bad bring to dealer or shop to put it on the OBD scanner and check for codes.

Sep 11, 2015 | Cars & Trucks

1 Answer

Obd2 connector location and how to paperclip readout my 2liter mazda 626 Build in 2000


If it was sold in North America, the connector is under the steering column, and you'll need a scanner or code reader to get the trouble codes.

Feb 03, 2014 | Cars & Trucks

1 Answer

Readout is showing "reduced engine power"


CHECK AIR FILTER ,AND HOUSING FOR LEAKS ,ALSO HAVE SOMEONE HOOK A HANDHELD SCANNER AND READ SERVICE CODES .
COULD BE EGR PROBLEM , AIR LEAK ,VACUMN LEAK ,LEAKY INJECTOR , ETC
CLOGGED AIR FILTER
AIR FILTER NOT SEATED RIGHT IN HOUSING

Feb 02, 2013 | 2004 Chevrolet Silverado 2500HD

1 Answer

How can I reset ABS codes on 1999 mazda 323


Hi Tony, To reset the readout you'll need to take the vehicle to someone with a scanner and have it done there. Have you attended to the fault/s which were showing? Regards Johngee10

Aug 20, 2011 | 1994 Mazda 323

1 Answer

The Engine idles extremly high at all times and even higher while in park. Around 3000 RPM.


Check idle positon sensor,mass air flow sensor, or have a tech run a code scanner on the computer to readout the problem.
Good Luck !

Mar 14, 2010 | 1996 Cadillac DeVille

1 Answer

No spark plugs at spark plugs explorer


The check engine light should be on--rent a scanner, readout any code(s) and pursue to repair(s). The usual item for this problem is a defective crankshaft or camshaft sensor. The scanner use helps prevent 'shot-gunning' of parts in an attempt to find the problem.

Nov 17, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...