Question about 2000 Chevrolet Venture
Need to know how to do it and what parts will be needed
Just a compressor will be needed to change it but prior to change you will have to **** any freon out that may be in the system unless it has all leaked if you just vent it and get caught is a $50k fine. after replacement you will have to have an hvac repair shop pull a vacumn on it to remove any moisture and oxygen from the system prior to freon going back into the system most shops will do the sucking down and refilling for you and let you change the pump yourself will just have to coordinate with a local repair shop.
Posted on May 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Air compressors very seldom become defective. However, if you wish to tackle the job make sure the freon is removed from the unit by loosening the high pressure valve. I would suggest you take it to a shop and have it repaired. Purchase what ever you need from the internet. Purchased all the parts to redo my 1966 mercury from Ebay, saved $400 hired expert to do the job for $200. Tools for replacing are expensive you would come out better by having it done. May be a small problem, such as the dryer, or low freon, or a leak Most shops will diagnosis the problem for free or a small charge. Or you could check the unit by adding a leak detector using the low side of the air condition unit. The low side is the lareer of th two lines in the unit.
Posted on Jun 28, 2009
the large meatal lines will have feron in them under pressure . your compressor that you buy needs to come with the oil already into. most shops that sell the compressors ahve very strict warrenties. you may need to replace your condensor and filter as well. then add freon. not a hard job to do but not easy
Posted on Dec 30, 2009
SOURCE: i need to know how
Assemble the clutch by installing the field coil with a snap ring. Align
the clutch field coil with the index pins, then install the clutch
spacer to adjust the clutch air cap on the compressor. Install the
clutch plate. Place the A/C compressor back into its manifold assembly. Secure the
bolts with a socket and ratchet, and place the manifold assembly back
into the Integra. Install the serpentine drive belt by following the diagram located on
the underside of the Integra's hood. Ensure the belt runs flat and
smoothly amongst the pulley system. Pour PAG oil and refrigerant into the A/C unit. Check the A/C system for leaks and test the system. Here you can find quality a/c compressor http://www.1airconditioning.com/our_products.htm
Posted on Aug 19, 2011
Tips for a great answer:
Mar 07, 2012 | 2006 Dodge Stratus
Aug 12, 2011 | Geo Tracker Cars & Trucks
Jan 09, 2011 | 1994 Oldsmobile 88
Sep 04, 2010 | 1994 Chevrolet Lumina APV
Dec 30, 2009 | 1996 Eagle Talon
Dec 07, 2009 | 2006 Kia Sedona
Apr 25, 2009 | 2000 Ford Taurus
Apr 10, 2009 | 2002 Hyundai Santa Fe
246 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: