Question about 1996 Suzuki X-90

Open Question

Need a pawl leveler for a1997 susuki x90 car - 1996 Suzuki X-90

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: transmision level fluid Baleno esteem 2002 susuki

The proper fluid level is marked on the dip stick. With the engine running and in park, raise the hood and remove the dip stick from the autotrans filler tube. With a clean rag, wipe down the stick and then place the dip stick all the way back in the tube again, and then pull it out once more.
Holding the stick level, you can now read what the fluid level is.

If you add any fluid, do so in small amounts, such as a half a pint at a time.

Do not add fluid with engine running.

Thank you for adding your comment
Bill, ASE Master Technician

Posted on Nov 23, 2008

jagjeffery
  • 318 Answers

SOURCE: misses only when wet, but

it has on plug coils you need to remove the coils to find the spark plug boots the spark plug bosses may be filled with water or even oil,if their is oil in the plug boss holes your valve cover is leaking the oil into the holes.

Posted on Apr 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a1997 Saturn sc1 auto tranny just stop working it was fine shut it off started it the next day it would not ingage in any gear fluid is fine


You need a transmission expert since your fluid level is fine and you are sure that your transmission lever (linkage) is properly actuating the tranny.

Aug 19, 2016 | Saturn Cars & Trucks

1 Answer

Car will roll while off and in gear


I am assuming this is an automatic transmission? It is possible your shifter cable or linkage got knocked out of adjustment but most likely the "Park "pawl has either come loose or is broken. It is a lever with a hook like shape that engages into a slotted ring at the output of the transmission.

Heavy duty trucks with Allison automatic transmissions do not have Park on the shifter because the "park pawl" couldn't handle the stress from the heavy loads twisting the driveshaft. Always set your park brake, even on level ground on all cars & trucks with automatic transmissions.

I hope it is just a shifter adjustment otherwise the transmission will have to be removed, disassembled, park pawl replaced.

Mar 26, 2014 | 1990 Ford Mustang

1 Answer

X90 fuse box identification


which one there are 2. ?
lost the operators guide? and x90 is a very rare car.
very hard to get books on it after so long, too.
the engine is the same as the 96 sidekick.
Why not photo them, and post it. no one ever has, it seems.

look here , for x90
http://www.scantool.net/software/alldata-diy-1-month-subscription.html



Jan 17, 2014 | 1996 Suzuki X-90

1 Answer

5r55n w/4wd rebuilt shifter stuck and immovable


You did not have access to the Parking Pawl Lever so it is not the Reason....

Apr 08, 2013 | 2000 Lincoln LS

1 Answer

My 1999 ford windstar is getting hard to get out of gear when park on a surface that is not level. What is the problem?


It may be a linkage adjustment. The park pawl is is binding on the park gear teeth.

You can elinimate this by just applying the parking brake before you put it in park. this will relieve any loading on the park pawl.

Jul 25, 2011 | 1999 Ford Windstar

1 Answer

Misses only when wet, but this 1.8 has no spark plug wires?? its a1997 susuki sport,, where do i look?


it has on plug coils you need to remove the coils to find the spark plug boots the spark plug bosses may be filled with water or even oil,if their is oil in the plug boss holes your valve cover is leaking the oil into the holes.

Apr 27, 2011 | 1998 Suzuki Sidekick

1 Answer

How to remove door panel on x90


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jul 13, 2009 | 1996 Suzuki X-90

1 Answer

Transmision level fluid Baleno esteem 2002 susuki


The proper fluid level is marked on the dip stick. With the engine running and in park, raise the hood and remove the dip stick from the autotrans filler tube. With a clean rag, wipe down the stick and then place the dip stick all the way back in the tube again, and then pull it out once more.
Holding the stick level, you can now read what the fluid level is.

If you add any fluid, do so in small amounts, such as a half a pint at a time.

Do not add fluid with engine running.

Thank you for adding your comment
Bill, ASE Master Technician

Nov 23, 2008 | 2002 Suzuki Esteem

Not finding what you are looking for?
1996 Suzuki X-90 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...