Question about Cars & Trucks

Open Question

Uno turbo starts does not rev up no power and miss fires

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: cambelt change on uno turbo

By now you probably have the cam/timing belt changed on the vehicle... Here goes anyway: I changed the belt on my 1372cc (identical engine - except for the Turbo and a few odds & ends) just over a week ago by following this simple process:

Disconnect the battery negative terminal
Remove the timing belt cover
Loosen the alternator drive belt nut, tilt towards engine and remove the belt
Remove the crankshaft pulley nut (size 36) - do this by selecting top gear and have an assistant press hard on the brake pedal - remove the pulley -the timing belt is now exposed.
Using paint or tippex, simply mark the camshaft sprocket as it lies with the inside timing belt cover, do the same on the crankshaft sprocket & the auxiliary shaft sprocket.
Loosen the tensioner nut - remove the timing belt.
Check that all pulleys are still in alignment according to your markings and refit the new belt by starting on the crankshaft sprocket (the thin white line across the new belt must align with the factory marking on the crankshaft pulley) and over the auxiliary sprocket and finally over the camshaft sprocket - tension the belt with the tensioner and tighten the tensioner nut.
Rotate the engine clockwise by hand making sure the camshaft sprocket rotates twice, check the tension on the belt and make sure the tensioner nut is fully tightened and the belt is secure.
Refit the crankshaft pulley, making sure the nut is tightened and refit the alternator belt, timing cover and reconnect the battery.

The same procedure is applicable on the 999cc/1108cc FIRE models as well as the 1301cc Turbo.

Good luck.


Posted on Jun 25, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an A5 3.0TDI which has a flat spot when


Can you describe what you mean by "flat spot"? Do you mean that there is par of the rev range where there seems to be little power? Turbo engines tend to produce bursts of power when the turbo spools up. Does the "flat spot" happen at low revs? If so, your turbo isn't spooled up yet. As you accelerate and it fires up you feel a rush of power. just a guess, provide more details and we'll try to help

Oct 06, 2013 | Audi Cars & Trucks

1 Answer

CAmbelt timing 0n 1400 Fiat UNO pACER 1995 MODEL


Whats the firing order on uno mia 1400 my kar wane start but keep failing I replaced the cambelt and drive belt and the module on the acnition also the roter now the firing remains the problem could you please send me an imige or video anything to explain the firing or what maybe might be the problem thanks

Feb 08, 2013 | 2006 Fiat 124

1 Answer

Hi I have a 92 model Fiat Uno 4 door i jst did service on it but da car has a miss sort of a fish bite but wen it reaches abt 2000 revs da car runs smooth wot could be da prblm


Sounds like a cylinder misfire to me. There are MANY things that can cause a cylinder misfire. Misfires that occur only at high speeds are usually caused by ignition parts (Spark plugs, wires, coils, etc.) or clogged up EGR ports.

May 20, 2012 | 1994 Fiat Uno

1 Answer

I have porsche cayenne s with turbo exhaust system......i hav changed spark plugs at 46000 km....and after 48000km it started missing when we drive it fast and then slows down it starts missing at low revs...


first of all let car get cold
open hood chek spark pluge cable weather they are fitted well or not if every thing fine also make sure the tight spark plug well..



if above fine might some oxygen sensor problem u can chk with dealer computer

Jun 18, 2011 | Porsche Cayenne Cars & Trucks

2 Answers

Cambelt change on uno turbo


By now you probably have the cam/timing belt changed on the vehicle... Here goes anyway: I changed the belt on my 1372cc (identical engine - except for the Turbo and a few odds & ends) just over a week ago by following this simple process:

Disconnect the battery negative terminal
Remove the timing belt cover
Loosen the alternator drive belt nut, tilt towards engine and remove the belt
Remove the crankshaft pulley nut (size 36) - do this by selecting top gear and have an assistant press hard on the brake pedal - remove the pulley -the timing belt is now exposed.
Using paint or tippex, simply mark the camshaft sprocket as it lies with the inside timing belt cover, do the same on the crankshaft sprocket & the auxiliary shaft sprocket.
Loosen the tensioner nut - remove the timing belt.
Check that all pulleys are still in alignment according to your markings and refit the new belt by starting on the crankshaft sprocket (the thin white line across the new belt must align with the factory marking on the crankshaft pulley) and over the auxiliary sprocket and finally over the camshaft sprocket - tension the belt with the tensioner and tighten the tensioner nut.
Rotate the engine clockwise by hand making sure the camshaft sprocket rotates twice, check the tension on the belt and make sure the tensioner nut is fully tightened and the belt is secure.
Refit the crankshaft pulley, making sure the nut is tightened and refit the alternator belt, timing cover and reconnect the battery.

The same procedure is applicable on the 999cc/1108cc FIRE models as well as the 1301cc Turbo.

Good luck.


Apr 14, 2009 | Fiat 124 Cars & Trucks

1 Answer

2001 vw golf 1.9 gt tdi miss fire


if you have a pd engine and you say that it miss fires i would change the wire loom to the injectors if it persists the air flow meter is on the blink, has you car ever gone into a limp mode status were you couldn't rev then check your turbo ,this may sound strange but just had a 150bhp tdi which was remapped with a very simular problem

Apr 07, 2009 | 2001 Volkswagen Golf

1 Answer

Escort van turbo diesel


check the accelarator cable isnt stretched (rev the car from the peddle, then from under the hood and listen for any rev differences) although its just been serviced also check that its had a replacement air filter. this could be restricting air.

Dec 18, 2008 | 1998 Ford Escort

2 Answers

Slow on starting , holds back when driving, even on an A road or motorway my vehicle is mitsubishi shogun long wheel base 2.8 turbo diesel


turbo must have a problem or remember tro vehicles have turbo lag. . . usually mitsu's turbos start giving power around 2500prm - 3000rpm. .

but usually on older turbo diesel mitsus the turbos are the first to go. . . .

Oct 21, 2008 | Mitsubishi Pickup Cars & Trucks

2 Answers

95 volvo 940 running rough


Have you checked compression on non firing cylinders? Likely has blown head gasket between these two cylinders if located side by side.

Jun 24, 2008 | 1995 Volvo 940

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...