Question about 2000 Chrysler Town & Country

1 Answer

SET UP GARAGE DOOR OPENER

How to set memory seaTS

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

The best thing that you can do is get the owners manual for your car and follow the instructions. For my Jeep linked to a Genie Door the steps were:
1. Clear the existing memory by holding the first & third button at the same time for 20 seconds. 2. Remove the cover on the opener so that I could push the transmitter link button on the door opener. 3. After pushing the button on the opener I had to then push whatever button that I wanted to program on the homelink in the car. (This has to be done several times if you have a rolling code door opener). 4. Repeat as necessary for each opener/homelink you are trying to program.
Again the best thing to do is get the owners manual for the car and follow the directions.
Good luck!

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Genie garage door op


There is a set button on garage door opener look at manual that is in the garage hanging. to make car and door work together you will need both manuals

May 16, 2014 | Lincoln MKX Cars & Trucks

2 Answers

Electric windows, locking system and seat memory not working


You have too many electric problem at ones, did you do some work on the car? the best thing take it to the garage

Mar 29, 2013 | 2004 Jeep Grand Cherokee

1 Answer

GMC Yukon Seat Switch


You don't mention what year your Yukon is ? This could very well be a control Module problem .
I'll post how the power memory seat's work or are suppose to work !

Memory Seats Description and Operation

Battery voltage is supplied to the memory seat module through a 25 A circuit breaker. The memory seat module supplies the seat adjuster switch assembly with a battery positive reference voltage. While the seat adjuster switches are in an inactive state the switch contacts are closed to the adjuster switch common circuit. When a seat adjuster switch is pressed to an active state the switch contact is closed to the reference voltage circuit. Battery voltage on a switch signal circuit indicates to the memory seat module the switch status is active. Each seat adjuster motor is controlled by the memory seat module through 2 motor control circuits. While the seat adjuster motors are in an inactive state the motor control circuits are closed to ground circuit contacts within the memory seat module. The memory seat module operates the seat adjuster motors by switching one of a motors control circuits to battery voltage. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.


Memory Set/Recall Operation
The seat adjuster motors are equipped with internal position sensors. The adjuster motor position sensors are monitored by the memory seat module and are used to determine the seat position when storing or recalling memory settings. The driver seat adjuster motors use potentiometer type position sensors. The position sensors are supplied with a 5 V reference and ground circuits from the memory seat module. The position sensor signal circuits return to an analog input within the memory seat module. During adjuster motor operation the position sensor provides a voltage change proportional to the change in revolution of the adjuster motor shaft. The memory seat module monitors the voltage from the position sensor signal circuits to determine the adjuster motor positions when storing or recalling memory seat position settings.
The memory recall switch assembly on the driver door provides inputs to the driver door lock/window switch. Battery voltage is supplied to the memory recall switch assembly from the driver door lock/window switch. When a RCL 1, RCL 2, or EXIT switch is pressed, the switch contacts close the appropriate switch signal circuit to the battery voltage supply circuit within the memory recall switch assembly. When the driver door lock/window switch receives active switch signals from the memory recall switch assembly, the appropriate commands are sent to the memory seat module using the GMLAN Serial Data circuit. The Body Control Module software version determines the personalization features available.
Memory seat recall operation is allowed only with the transmission selector lever in the PARK position while the ignition is on. The transmission selector lever position data is provided to the memory seat module by a message through the GMLAN Serial Data circuit.

There are somethings listed you are not familiar with , like GMLAN Serial Data circuit ,maybe Body Control Module software etc... GMLAN is a communincation network that the computers on the vehicle uses to share information , transmit commons etc... you can google it to read about it .

There are DTC'S - diagnostic trouble codes that can set in the module in control . Do you know what DTC'S are .

DTC Descriptors
DTC B1825 01: Driver Seat Recline Position Sensor Circuit Short to Battery
DTC B1825 06: Driver Seat Recline Position Sensor Circuit Short to Ground or Open
DTC B1825 5A: Driver Seat Recline Position Sensor Circuit Plausibility Failure
DTC B1850 01: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Battery
DTC B1850 06: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Ground or Open
DTC B1850 5A: Driver Seat Lumbar Horizontal Position Sensor Circuit Plausibility Failure
DTC B1860 01: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Battery
DTC B1860 06: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Ground or Open
DTC B1860 5A: Driver Seat Lumbar Vertical Position Sensor Circuit Plausibility Failure
DTC B2355 01: Driver Seat Front Vertical Position Sensor Circuit Short to Battery
DTC B2355 06: Driver Seat Front Vertical Position Sensor Circuit Short to Ground or Open
DTC B2355 5A: Driver Seat Front Vertical Position Sensor Circuit Plausibility Failure
DTC B2365 01: Driver Seat Rear Vertical Position Sensor Circuit Short to Battery
DTC B2365 06: Driver Seat Rear Vertical Position Sensor Circuit Short to Ground or Open
DTC B2365 5A: Driver Seat Rear Vertical Position Sensor Circuit Plausibility Failure
DTC B2375 01: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Battery
DTC B2375 06: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Ground or Open
DTC B2375 5A: Driver Seat Assembly Horizontal Position Sensor Circuit Plausibility Failure

5) Memory Seat Module is under the front of the driver seat , you could look under an see if all the connectors are fully seated.

The best diagnostic step would be to hook up the factory scan tool an see what the computer is seeing as far as inputs from the switch an outputs it's sending . I wouldn't suggest you take the seat apart an try testing electrical inputs etc.... unless you very familiar with automotive electrical systems an circuits .

Mar 06, 2017 | GMC Cars & Trucks

2 Answers

My drivers seat moves full forward when i open the door


their is a fault with the memory and its a dealer only job because of the encrypted software used which is only readable by the factory via the internet so be prepaired for a bill and half or set the seat then unplug the wires

May 16, 2010 | 2005 Porsche Cayenne

1 Answer

How do you reprogram the keyless door lock code?


  1. Enter the five digit permanent entry code into keyless entry keypad.
  2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code. (Factory code found on the module).
  3. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code: 9/0-- no memory recall
      1/2-- memory seat position 1
      314-- memory seat position 2
      5/6-- memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.

The Keyless Entry Module is located inside the drivers side door.

Jun 21, 2009 | 1985 Lincoln Town Car

1 Answer

Drivers side mirror resets to up position when door is opened on a 2004 volvo s60


That is probably because the setting for the mirror had been saved in the memory along with the setting for the driver's seat position (if your model has programmable memory for seat position. Set the mirror in the most convenient position and also the driver's seat. Press and hold the MEM button on your driver's seat and press any of the memory numbers. This will store those settings in the memory so that even if someone else alter these setting, the mirror and the seat will be adjusted to the memorised setting when you use the remote to open the car.

Apr 28, 2009 | 2002 Volvo S60

2 Answers

Three buttons on drivers side sun visor


ok, this other guy has the buttons your talking about confused with 3 buttons on the drivers side door panel, just above the handle...
the buttons you are looking at on the visor are programmable to open your garage door...however since i've never owned a garage door that i use at the same time i've owned my grand cherokee, i have never tried setting it, so i'm not exactly sure how to go about that...

Mar 28, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Setting garage door opener


Most openers are programmed the same. You normally program the house garage opener to accept the new remote. Your garage opener will have a button to press to add in a new remote. Normally you press this and then press the remote in the car and hold until your lights on your opener flash or the garage door closes. (check your manual on your garage door opener)

Mar 27, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

2002 GMC ENVOY GARAGE DOOR OPENER


You have a quick fix item. There is a send code button on your garage door opener. You simply have to press that button, and within 5 secs, press and hold the button on the garage door opener (your car or other) until the opener rapidly blinks. The garage door and the opener will share info,,, and presto,, you can open by the remote opener. Take a peek at your garage door opener instructions. You can have up to three settings at one time... one for each button. I was asked if the buttons ever got the openers mixed up,, and the answer is absolutely not.

Jul 15, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
2000 Chrysler Town & Country Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...