Question about 2003 Toyota 4Runner

1 Answer

2003 4Runner Electrical problems - Door Lock and Rght Turn Signal

I have a 2003 4Runner V8. The right front turn signal works for a few days and then goes out for a few days. I have replaced the bulb twice in the last 4 months. Now, my front lock on the driver side makes a horrilbe sound (like it is not catching) when I lock by remote or manually.Any ideas?

Posted by on

  • alfarrish May 20, 2009

    That makes sense. When we jiggle the bulb it will work.



    Is that an easy thing for a novice or do you recommend taking it to a shop?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Toyota Master
  • 358 Answers

Needs new light socket. common problem.

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My right front turn signal not working the bulbs are good and so is the fuse but I don't have fire going to them it's a 2010 chevy 2500hd


You don't have fire , never heard it called that before ! Battery voltage , power but never fire ! An open CTSY fuse located in the I/P fuse block will affect the operation of the right front turn signal only
Turn Signal/Hazard Lamps When the turn signal switch is placed in either the left or right position, a ground signal is completed from the turn signal switch to the BCM. When the hazard flasher switch is activated, a ground signal is completed from the turn signal/hazard switch to the BCM. The BCM then sends an ON-OFF voltage signal through the fuses to the appropriate turn signal and side repeater (export only) lamps or to all of the turn signal fuses for hazard operation. The driver door switch and passenger door switch also receive voltage from the BCM turn signal supply voltage circuits for the mirror turn signals. The door switches have no function or control of the mirror turn signals other than a pass through connection for the circuits. The audio chime is also activated when the turn signals are ON. The instrument panel cluster (IPC) receives the signals to activate the turn signal indicators over the GMLAN serial data system. When the hazard switch is pressed, all turn signal lamps will flash including both IPC turn indicators.
Ground is applied at all times at G201 to the turn signal/multifunction switch. The turn signal lamps may only be activated with the ignition switch in the ON or START position. When the turn signal/multifunction switch is placed in either the TURN RIGHT or TURN LEFT position, ground is applied to the body control module (BCM) through either the right turn or left turn signal switch signal circuit. The BCM then applies a pulsating voltage to the front and rear turn signal lamps through their respective control circuits.
.

Jun 25, 2015 | Cars & Trucks

2 Answers

69 turn signal problem left turn signal not working. right turn signal causes both to falsh


it's the grounds if they're both flashing fast it's definitely grounds take a test light and see if its got power goes through the test light grounded to the frame and if the light comes on then it's definitely your grounds

Jul 29, 2014 | 1969 Pontiac Firebird

1 Answer

Hyundai Sonata 2004 turn signal does not work properly


did you check the directional switch. sounds like you have a bad one

Nov 07, 2012 | Hyundai Sonata Cars & Trucks

2 Answers

1992 Cadillac Brougham 5.0 L V8 RWD, turn signal don't work.


The turn signal switch is most likely the problem,but change the flasher for the turn signals first,some times this is all that it is.

Jun 11, 2010 | 1992 Cadillac Brougham

1 Answer

Left turn signal works / don't work, brake light


possibly flasher unit faulty
or turn signal switch

Feb 22, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Turn signal only works for a few clicks. Also


you need a new blinker relay/ hazard switch assembly

they are $30 from the dealer.

as for the other 2 problems im not too sure about

Jul 08, 2009 | 2002 Volkswagen Passat

2 Answers

Right turn signal flashes too fast I have replaced my front turn signal bulbs a few times and within a couple days they stop working and the blinker on the inside flashes very fast. I have looked for the...


littlejevans: The turn signal flasher works against the resistance through the bulbs both front and rear. The Malibu's had a problem with the rear light sockets which caused problems with the tail lights. Have you checked to see if the rear lights are functioning correctly?

May 29, 2009 | 2005 Chevrolet Malibu

2 Answers

1994 Chevrolet K1500 pickup: wiper and turn-signal problems


The wiper and turn signal switch all on the same stalk switch?
Let me know.
Regards,

Apr 09, 2009 | 1996 Chevrolet K1500

1 Answer

No lights in rear


I would Get in the Back pull up anything covering the Wiring harness for those lights and Look for A Corroded Connecter AND the GROUNDS on all thats why urn comes on while you Brake Electricity Finds the Easyest PATH to GROUND AND IF IT IS THROUGH THE Turn Sygnal switch GROUND is your FIRST PRIORITY here Trust me I'm ASE Certified in Electrical Systems
Grounds FIRST Please Dont forget to RATE me Thank You !

Dec 14, 2008 | 1991 Honda Accord

1 Answer

TURN SIGNAL


sounds like a possible short in the wiring or a possible grounding problem.

Aug 30, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
2003 Toyota 4Runner Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...