Question about 1983 Porsche 911

1 Answer

Tire Pressures What are the tire pressures for a 1983 911 SC Targa?

Posted by on

  • Frank
    Frank May 11, 2010

    depends on the size if the tires you have on the car. look at the side of the tire, half of the max spec in psi rating.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 273 Answers

Follow this link and type in your reg number kwik fit should be able to help

Posted on May 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What are recommended tyre pressures

tire pressure is a function of car weight and tire type.
since you didnt post car year, we cant guess that, can we.
for stock tires, in the USA< open door, see tire pressures clearly stated.
for non stock tires, that sticker is USELESS, (not stated)
so in that case you get to play car engineer.
using the offical loading charts on the tire.
My jeep , has this. and i Did that.
if you get the pressure wrong the tire treads cup or crown.
it's a balance this.

short answer, ask Goodrich. or get the data sheet on YOUR tire.
and read it.
it's there,

Jul 10, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

What is the light for that has the ! mark in it and how does I fix it.

Hello. Welcome to FixYa. Please alllow us to assist you.

The light you have illuminated (the ( ! ) light) is the 'low tire pressure' light.
One or more of your tires is below the recommended inflation pressure.

What you need to do:
Check all of the tire pressures (including the spare) with an accurate tire pressure gauge. The gauges that look like a pen, and fit in your pocket, are not accurate. Get a good gauge; one with a needle display. Set the tire pressures in accordance with the tire pressures that are printed inside the driver's side door area, on a sticker. One the tire pressures are reset, the light should go out automatically on the next startup or two.

Important note: If the light came on after you just had new tires fitted, and the inflation pressure is correct, your tire shop may have damaged the sensor.

If you need further assistance, please feel free to get back to me.

Thanks for choosing FixYa for assistance today.

Nov 10, 2010 | 2006 Toyota Solara

1 Answer

Recommended tire pressure

Regardless of the vehicle, the manufacturer's recommended tire pressures are normally printed on a small plate attached to the vehicle. This is usually found in one of two locations: on the driver's door or on the body on the driver's side. The plates are normally installed below the latch on the door or on the frame, in a location that is not visible when the door is closed. If you open the door and look along the rear edge of the door or along the narrow section of the body that is hidden by the door, you should find such a plate. The recommended tire pressures are also included in the owner's manual and are molded into the tire's sidewalls. Unless the tires have been selected for a special purpose, in which case they will have their own specific guidelines, use the tire pressures printed on the plate or in the owner's manual.

There is not a lot of variation in the tire pressure between different automobiles, although some trucks and SUVs use lower tire pressures for off-road operation. The typical automobile uses a tire pressure between 30 and 32 psi on all four tires.

Maintaining the correct tire pressure is important. The vehicle's handling and safety will be adversely affected if the tire pressure is too low. Tire wear is also affected by incorrect tire pressures, both too low and too high.

Comments Add a comment...

Oct 01, 2010 | 2000 Buick LeSabre

1 Answer

Tire pressure light comes on

You shouldn't be setting the tire pressure to the max inflation pressure listed on the sidewall, that will likely result in uneven tire wear with the center of the tire wearing out prematurely. You should set the pressures according to the listings in the door jam. Most likely 32-34psi. Also, have you checked the spare tire? Some systems monitor and will illuminate the TPMS light if the spare tire pressure isn't within an acceptable range. The spare is often overlooked when checking tire pressures because of a TPMS indicator.

May 11, 2010 | 2005 Scion tC

1 Answer

How do you turn off a tire pressure sensor dash light on a 2006 Mitsubishi Galant

check the tire pressures in ALL tires not just the 4 on the ground but the sapre also. If the pressures are all correct and the light is still on you may need to take it to a tire store such as good year or firestone or eve you local dealr to have the tpms SYSTEM checked out, (TPMS Tire Pressure Monitoring System)

Jul 21, 2009 | 2006 Mitsubishi Galant

3 Answers

Tire pressure light is on

You cannot reset them,Make sure that you check the pressures in the tires. The Infiniti Tire Pressure Monitoring System is designed to trip the warning light anytime the pressure in any of the tires drops below 29 psi. At 29 psi it really won't look like the tires are low. You could have one tire at 29 or 28 causing the light to stay on all the time. Check your pressures, set at 34 or 35 to be safe, or whatever pressure the tire is recommended to be. Not all infiniti vehicles with TPMS have the display that shows the pressure in each tire. If the pressures are above 29 psi, Then there could be an issue with one or more of the sensors. If you have the tires replaced you will have to have the sensors relearned at the dealer. Tire rotations do not require the same. 

May 02, 2009 | 2005 Infiniti G35

6 Answers

Lexus sc430 tire pressure monitor

there is a reset button for the tpms either just above the accerlator or to the right of the glove box. press it and tah should be good to go.

Feb 08, 2009 | 2002 Lexus SC 430

1 Answer

08 Highlander Indicator light

The icon that you are referring to is the "tire pressure warning" light. This indicates that one (or more) of your tire pressures is below the specified inflation pressure. Note that the SPARE tire pressure is also checked. Best advice: Get a real good tire pressure gauge, and reset all of the tire pressures to specification, which is marked on a sticker on the driver side door opening. Once the pressures are set to specs, the light will go out automatically. This should help you out. Thanks for choosing FixYa.
The graciousness of a FixYa rating would be most appreciated!

Nov 24, 2008 | 2008 Toyota Highlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

918 Answers


Level 3 Expert

79865 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides