Question about Cars & Trucks

Open Question

Saab 93 - code P1251 - having problems cutting out

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

saailer
  • 1868 Answers

SOURCE: I have a 2001 Saab

Hello! The problem is that the Electronic Throttle Motor (ETM) is in limp mode...Most common fault is that the mechanism is fouled with carbon...But first check connector for loose or broken wires...It has a 10 pin connector...Remove and clean motor and throttle body using throttle body cleaner...See attached drawing...It is a procedure to take the motor out of limp mode...

Guru...Saailer

374d58e.jpg

Posted on Sep 19, 2010

  • 40800 Answers

SOURCE: Hi my Saab 2001 93 2.0 turbo convertible has lost power get into limp home mode I reset it every few weeks codes come up p1105 p1260 p1251 p 1264 what do u think is wrong ?

code p1105 refers to manifold absolute pressure(MAP) sensor, TC system-leak detected. causes ---intake leak, ---hoses There are to references to p1105 The second response is still map sensor but the causes are---TC system--mechanical fault--air leak between throttle body-TC,map sensor---TC system--exhaust blockage
code p1260 refers to throttle return spring--weak spring force. causes ---mechanical fault,--,throttle control unit
code p1264 refers to throttle valve opening-accelerator released causes ---throttle control unit---mechanical fault

Posted on Mar 28, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the fuel pump on my 2005 saab 93 it still wont start


A common problem is a bad crank sensor on a 9-5 2.0t and 2.3t! if is bad, it doesn t send signal to the ECM, then the ECM do not send power to the pump relay! it is always better check fault code first

Sep 26, 2014 | 2004 Saab 9-3

1 Answer

Hi my Saab 2001 93 2.0 turbo convertible has lost power get into limp home mode I reset it every few weeks codes come up p1105 p1260 p1251 p 1264 what do u think is wrong ?


code p1105 refers to manifold absolute pressure(MAP) sensor, TC system-leak detected. causes ---intake leak, ---hoses There are to references to p1105 The second response is still map sensor but the causes are---TC system--mechanical fault--air leak between throttle body-TC,map sensor---TC system--exhaust blockage
code p1260 refers to throttle return spring--weak spring force. causes ---mechanical fault,--,throttle control unit
code p1264 refers to throttle valve opening-accelerator released causes ---throttle control unit---mechanical fault

Mar 28, 2013 | 2001 Saab 9-3

1 Answer

I retrieved codes 1260 1251 and 1231 with a snap on versus. it will not give me any code descriptions. will not idle on own. vehicle seems to misfire will holding throttle to keep running. after i clear...


CODE P1260 THROTTLE RETURN SPRING WEAK SPRING FORCE. CODE P1251 THROTTLE POSITION MOTOR FULLY CLOSED POSITION. CODE P1231 THROTTLE POSITION SENSOR 1 AND 2 RANGE PERFORMANCE PROBLEM. SOUND LIKE PROBLEM IS MECHANICAL PROBLEM.YOU HAVE WEAK THROTTLE RETURN SPRING.GO TO DEALERSHIP PARTS DEPARTMENT FOR NEW RETURN SPRING.

Jan 15, 2011 | 2000 Saab 9-3 Viggen

1 Answer

I have a 2001 Saab 93 with a trouble code of P1251. Any idea of what that means?


Hello! The problem is that the Electronic Throttle Motor (ETM) is in limp mode...Most common fault is that the mechanism is fouled with carbon...But first check connector for loose or broken wires...It has a 10 pin connector...Remove and clean motor and throttle body using throttle body cleaner...See attached drawing...It is a procedure to take the motor out of limp mode...

Guru...Saailer

374d58e.jpg

Sep 19, 2010 | 2001 Saab 9-3

1 Answer

WHAT DOES ENGINE COE P502 MEANS ON A 2000 SAAB 93


The Code you're referring to should be a "P0502." What the Code signifies is: "Vehicle speed sensor circuit, low input."

May 18, 2010 | 2000 Saab 9-3 Viggen

1 Answer

I have a 2006 Saab 93 the air bag lighs on


hi.. with saabs any fauslt in the past may bring up a fault triggered by something so it may not be broken it may just need a dealer to remove the fault code.

Feb 11, 2010 | Saab 9 3 Cars & Trucks

3 Answers

Turning off service light on saab 93


Hi,If you press and hold the reset button on the SID unit the message will go out ,however it might come back on a few times so you may have to repeat this for a couple of days till it stays out.

Jan 29, 2009 | 2001 Saab 9-3

3 Answers

Help!! Check engine light- code P1251????


Output From Control Module Low

Jun 20, 2008 | 1999 Saab 9-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...