Question about Hyundai Motor 2005 XG350

1 Answer

Need to change pully

How di i change a belt tensioner for a 2005 hyundai xg350

Posted by on

  • Paul McGrath
    Paul McGrath May 11, 2010

    Which tensioner? The A/C belt? or the Power steering?... or the Timing Belt tensioner?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Which One?
need to change pully - 60a96c9.jpg The one on the left has two 14mm fasteners 1 nut & 1 bolt. The one on the right has the same 1 14mm nut and 1 14mm bolt. Both are simple to replace. Step 1: Relieve the tension on the pully you wish to replace. Step 2: remove the pully (front) by removing the 14mm nut. To remove the rear tensioner pully, remove both nut & bolt.

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dodge dynasty 1990 i replaced my serpentine belt now it wont stay on need to replace my tensioner pully how do i do it?


undo the big nut in front of the pulley. release the tension on the belt by adjusting the small bolt at the rear of the adjuster bracket . Take the nut of the shaft and pull the pulley off. Remember where the spacer goes at the back of the pulley.

Jan 10, 2014 | Hyundai Motor 2005 XG350

1 Answer

How hard is it to change youe=r selk is this a


No. There is so much you will have to move out of the way to do it. It is better to pay someone to do it and sit back and have a beer or two while waiting.

Mar 23, 2010 | 2004 Hyundai XG350

1 Answer

How to change serpentine belt .05 UPLANDER


pasenger side of the car ther will be a Tensioner pully (wheel) stick a 3/8" scocket on the wheel ( there is a place for it) and move it to the Right (drivers side) this will slack the belt and allow you to replace it. often there is a diagram that show's you the belt patern, and one of the pullys will have a little arrow that points in. that is the indication of you tensioner pully and the direction it needs to go to release tension. After you have the old off, put the new one on around and release the tensioner pully, and thats is

Feb 22, 2010 | 2005 Chevrolet Uplander

2 Answers

I need 2004 Hyundai XG350L Service/repair Manual


3.5L Engine

Remove or disconnect the following:
  1. Negative battery cable
  • Engine coolant
  • Water pump pulley bolts
  • Alternator bolt, loosen only
  • Water pump pulley and drive belts
  • Crankshaft pulley
  • Timing belt cover(s)
  1. Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
  2. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
  3. Mark the timing belt with an arrow showing direction of rotation.
  4. Remove the timing belt.
  5. If defective, remove the timing belt tensioner.

9767b45.gif
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine

To install:
  1. If necessary, install the timing belt tensioner.
  2. Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
  3. Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
  4. Align the timing marks of the camshaft and crankshaft sprockets.
  5. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
  6. Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
  7. Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
  8. Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
  9. Turn the crankshaft two turns clockwise.
  10. Readjust the sprocket timing marks and tighten the tensioner bolts.
  11. Install the timing belt covers.
  12. Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
  13. Install or connect the following:
    • Timing belt cover(s)
    • Crankshaft pulley
    • A/C compressor belt
    • Water pump pulley
    • V belt
    • Negative battery cable
    • Engine with coolant

Feb 10, 2010 | 2004 Hyundai XG350

1 Answer

HOW TO CHANGE A/C COMP. BELT ON HYUNDAI XG 350


loosen tentioner pully belt... using a 14 mm wrench, release tension on the belt by loosening the 14mm bolt. when loose enough, remove belt.. then install NEW belt.. adjust tension on new belt then tighten 14mm bolt on tensioner pully... you're done.

Jul 16, 2009 | 2002 Hyundai XG350

1 Answer

How do I change the pulley on my 01 sante fe v6? I know it has an automatic tensioner but I don't know how to take the serp belt off to change the pulley.


Tell you what... No response, then I can't help. If you're talking about the accessory drive belt tensioner pully, there are two 12mm bolts which mount it to the engine. You'll need a 3/8's drive ratchet (or other 3/8's drive device) to release the tension so you can remove the accy drive belt to facilitate removal of the tensioner pully. Once you're remove the accy drive belt, remove the two (2) 12mm bolts holding the tensioner pully to the engine (make visual note of position/direction of the drive belt when you do this because you'll need to position the drive belt in the same orientation when you install a new auto-tensioner in place of the old one.).

May 13, 2009 | 2003 Hyundai Santa Fe

1 Answer

I need to set timing on my hyundai xg350


It is a pain in the **** on the 3.5L. One trick I have found is not only do you have to take the hydrolic tensioner off, but it makes it easier if you also loosen the manual tensioner right by the hydrolic one. there are 2 holes in the pully. when you finally get the belt on when lined up correctly, turn the tensioner so the belt is really tight, you should be able to pull the pin on the hydrolic tensioner and put it back in. If the belt is too loose in front one of the cams will spin to one tooth off. have patience, these belts are a pain!!!!!!

May 10, 2009 | 2002 Hyundai XG350

1 Answer

Tensioner making high pitched squeak while eng is running.


It sounds like the tensioner bearing is bad. Loosen the belt and then wiggle the pulley. If it's loose side to side it's going bad. Luckily these are cheap and easy to replace. Good luck. Please rate me so I know how I'm doing. Thanks.

Dec 30, 2008 | 2002 Hyundai XG350

1 Answer

Serpentine belt squeeling


To replace the sepentine belt: Get a 9/16 socket with a extension. Look under the car and look for the oil filter. Next to the oil filter you will see a bolt. Use the sock and losen the bolt. This will losen the tensioner. You will notice the bolt coming out, push the bolt up and the tensioner will allow you to remove the belt.

Dec 29, 2008 | 2006 Hyundai XG350

Not finding what you are looking for?
Hyundai Motor 2005 XG350 Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...