Question about 2007 Ford F-250 Super Duty Lariat

1 Answer

Can't find the fuel filter and truck won't start

I have 2007 Ford F250 super duty. It started fine this morning and now it won't start. It turns over but won't fire. we were going to check the prime button but can't seem to find fuel filter. please help

Posted by on

  • 1 more comment 
  • pastrust55 May 11, 2010

    Is it not starting because there is no spark? or is it not starting because of no fuel? Check for spark by removing a spark plug wire. Put an old spark plug in the wire and place the spark plug on a ground. Turn the engine over and observe if the plug has spark.


    If there is spark then turn the key off. Reinstall the spark plug wire. Wait a few minutes then move the key to the first notch in starting. Listen for the fuel pump. if you dont hear the fuel pump investigate whether the pump is working or not.


    If you hear the pump, then you should investigate if the fuel is getting to the engine.

  • Keith Heavilin
    Keith Heavilin May 11, 2010

    I couldn't find anything online about the filter location but if it's like all the other Ford trucks I've worked on, it is located in the fuel line mounted to the frame on the drivers side of the car.  Ford has a special tool you can get from any auto parts store to brake the seal between the line and filter.  Seems like it should be easy but always takes twice as long as I think it should to get the things off.

  • BartBlack
    BartBlack May 11, 2010

    What enigine is in your truck?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Should b on the driver side in the frame rail mid way on truck

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 2001 f250 v10, ran out of gas, filled tank and still won't start


check for fuel pressure at fuel rail if no pressure or low pressure check and change fuel filter while ya have it off or it could be relay switch that would be the least expensive place to start good luck

Oct 15, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

No crank/no start


try adding some fuel additive for cold weather starting

Mar 11, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

My 2007 7.3 sputters


I would like to know what happened first oil and filterchange or the truck started to act up first, However Check and make sure the fuel cap is vented properly first and then check the filter cap is not leaking . It could getting air in or the fuel pump could be going bad . $169 .00 for the generic pump. Good luck

Aug 07, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

2005 F250 6.0 hard/no start.


Check the connections under the FICM. (fuel injection control module) It is on top of the left valve cover. It is the big silver flat box. There is 3 connectors underneath that should be "clicked" onto the module. Do this with the key off as there is a very high voltage there.

May 03, 2009 | 2005 Ford F 250 Super Duty

2 Answers

Hard Starting in morning


Do mean you have hard time communicating with a scanner at the OBDII connector, if so make sure you power at pin16 at diagnostic connector, also we have seen issue with glowplugs not working properly causing hard start when cold and starts fine after warm-up
You can check for glowplugs operation at initial key-of before cranking by checking for voltage at each glowplug connector with a multimeter.

Mar 08, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Changing f250 fuel filter (gas)


Sounds like a fuel pump, but start with the filter.

Sep 28, 2008 | 2001 Ford F250 Super Duty Super Cab

Not finding what you are looking for?
2007 Ford F-250 Super Duty Lariat Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...