Question about Rover 25

Open Question

Brake lights and reverse lights not working on rover 25

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

canbruce75
  • 1776 Answers

SOURCE: both brake lights don't work on Rover 25, even

Have you checked the fuse for the brake lights to make sure it is not blown? If bulbs and fuses are good, I would look at a defective brake light switch. These switches are typically located somewhere under the brake pedal, close to the firewall. When the brake pedal is depressed it trips the switch. Find the switch and you can easily test it with an ohm meter or multimeter. Sure hope this helped you and good luck.

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi eveyone. Have 06 Range Rover with P0736, U0167. Electronic parking brake light flashing, Vehicle not driving at all. Thanks.


P0736 is reverse incorrect gear ratio
U0167 is Lost communication with vehicle immobilizer control module

May 18, 2016 | Rover Cars & Trucks

5 Answers

1998 Land Rover Discovery Series 1


You can energise the interlock solenoid, by you give a positive (+12V) lead to the RED and a negative (ground) to the black line at the transmission selector's connector.
If it works you should check the positive signal at the red.
It should be there if the ignition is on, brake pedal depressed, and the transfer box is in some gear, and the fuse 1 isn't blown.
At the black cable should be a ground signal if the selector in 'P' position.
If you give me an e-mail address I'll send the wiring.

The ABS problem, you have better to check followings.
- All the wheels bearings' play.
- are the ABS sensors at the deepst position? Knock some to that head (not strong) and they shouldn't move deeper.

-land rover repair

Jul 26, 2008 | 1998 Land Rover Discovery

2 Answers

I have a 2004 rover 25 1.4, this morning tail lights and number plate light not working, reverse, fog and brake lights all fine, advise pleas?


Brake light? Some bad connections to light sockets if bulbs not burned out. Of course you will need help to see brake light when brake is pushed.

Mar 08, 2015 | 2004 Rover 25 1.4

1 Answer

Rover 25 problems


the shudder is from either the front brake rotors or rear brake drums being warped. Probably the rear brake drums. People use the emergency brake as a parking brake, and when the brakes are hot, it warps the drums from the pressure. The "blades" sound is probably the starter ring gear, or the starter itself.

Dec 03, 2013 | Cars & Trucks

1 Answer

How to replace brake light bulb on 1998 Land Rover Discovey? LE


1. Pull out side facing seat or pocket cover.
2. Unscrew fastener and remove access panel.
3. Turn bulb holder anti-clockwise to release.
4. Remove bulb.
Refitting is reverse of the above procedure

Nov 09, 2013 | 1998 Land Rover Discovery

1 Answer

No Brakelights


there's a brake light switch o the arm the brake pedal is connected too,it has two wires going to it. hook two wires together if brake lights go on replace switch if not check for power to switch

Jul 07, 2012 | 1996 Land Rover Discovery

1 Answer

Rover 25 dash lights not working


Have you checked your fuses? This is the first place I look when probs with dash/lights come up. Daddy taught me well. Another excellent source of troubleshooting and repair is a Chiltons/Haynes repair manual for your make/model/year vehicle.

Dec 21, 2011 | Cars & Trucks

1 Answer

Both brake lights don't work on Rover 25, even changed bulbs and they still don't work


Have you checked the fuse for the brake lights to make sure it is not blown? If bulbs and fuses are good, I would look at a defective brake light switch. These switches are typically located somewhere under the brake pedal, close to the firewall. When the brake pedal is depressed it trips the switch. Find the switch and you can easily test it with an ohm meter or multimeter. Sure hope this helped you and good luck.

Jul 20, 2009 | 2002 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rover Experts

yadayada
yadayada

Level 3 Expert

75222 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Rob
Rob

Level 2 Expert

62 Answers

Are you a Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...