Question about 2001 Daewoo Lanos

2 Answers

2001 daewoo lanos, blinkers dont work

The blinkers or the hazard lights are not working. what could it be

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

Posted on Jun 15, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,865 Answers

The flasher unit...a little silver colored can possibly mounted near the fuse block

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

1 Answer

Signals lights will not work


Check indicator relay, hazard light switch operation and replace components if necessary. Also check fuse in fuse box.

Nov 11, 2012 | 2001 Daewoo Lanos

1 Answer

Where's the IndIcator relay swItch on a daewoo lanos


Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

May 29, 2012 | Daewoo Cars & Trucks

1 Answer

I have a 1998 model daewoo lanos and my indicators arent working tried the switch combo... and the fuses and relays what else could this be do u think


check the flasher unit,In this model it should incorporate relay and flasher in one unit under dash.I will have to check my files for what it looks like or I have a Lanos coming in a few days.
Try the hazard switch to test if this works still,and all bulbs ok.
Also when you say 'aren't working',does this mean they light but don't flash or don't light at all both side.Let me know your findings.

Apr 03, 2011 | 2001 Daewoo Lanos

1 Answer

The blinkers and brake lights on my daewoo Lanos not working


Hello. As you know, this car was only made for six years by the Korean automaker. For some if not all of these cars the flasher is behind the instrument cluster. It is accessible through an access panel on the side of the dash by the driver's door. The flasher is most likely green on a violet block.
That said, in addition to the flasher being a possible culprit I would also suspect a relay, and a poor ground wire. Trace the ground wire from these lights to the frame of the car and make sure you have a good solid connection, with no corrosion. If the contact point is corroded relocate the ground screw and make sure that you have scraped and sanded the spot so you are contacting bare, clean metal.

Dec 02, 2009 | 2000 Daewoo Lanos

1 Answer

Blinker works intermittently


more than likely u have a bad flasher. to use it in the meantime, do this: push the lever just enuff to see the arrow flashing (before it starts buzzing), then hesitate briefly and slowly move the lever into the full position. or if u prefer u can hold the lever at the flash until your turn is made.

Jul 29, 2009 | 2002 Daewoo Lanos

1 Answer

2002 Daewoo Lanos blinker problems


change the switch in the steering collum

May 15, 2009 | 2002 Daewoo Lanos

2 Answers

Indicators not working for a daewoo lanos 1998 model.


If both indicators and hazard lights are not working, probably the indicator relay is broken.
Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

Jan 18, 2009 | Daewoo Lanos Cars & Trucks

2 Answers

Blinkers work sometimes, sometimes they don't


Sounds like the flasher(which is your hazard switch) is failing.

Sep 03, 2008 | 2002 Pontiac Grand Am

Not finding what you are looking for?
2001 Daewoo Lanos Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...