Question about Cars & Trucks

1 Answer

Have a 97 camaro here the starting switch rod came off track how do I reach it?is this the reason for it not starting or any lights coming on?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

This calls for dropping the steering colum and taking the switch loose enough to realign the rod..

Posted on Dec 31, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable kill switch on a 97 camaro?


This all depends on what kind of kill switch, most kill switches operate by cutting a wire and running it through a switch, so locate the switch and remove the wires and connect them together, there should be a wire on each end of the switch, like a light switch, the switch connects them or disconnects them, so you will connect them,

Mar 24, 2011 | 1997 Chevrolet Camaro

3 Answers

1997 z28 will not crank. All dash lights come on but it will not turn over. Starter and battery are good


I would check ignition switch. On the starter, check to see if you are getting power to the small terminal on the starter when you turn the key to the starting position.

May 03, 2010 | 1997 Chevrolet Camaro

2 Answers

On my 1990 camaro, 2 rods on the steering column are lose what do they lead to they turn my ignition key does this effect the starter because the car turns on all lights and everything works but car wont...


one leads to highbeam headlights switch the other leads to the electrical ignition switch that turns on the car and cranks the starter if you test the purple wire on the starter with the key in the crank position you shuold see 12 volts on that purple wire that comes from the ignition switch also try moving the gear selector shifter while holding key to crank could be netural safety switch problem

Apr 08, 2010 | 1990 Chevrolet Camaro

2 Answers

When I go to turn on my lights on my 97 chevy


most vehicles wire the dash lights in with the rear stop lights to warn the driver of the problem they cannot see. check the fuse for your rear stop and tail lights. had this problem on my vehicle too.

Mar 26, 2010 | 1997 Chevrolet Camaro

1 Answer

Replace ignition in 1999 camaro


The steering wheel does have to come off to access the ignition lock cylinder, however the ignition switch is mounted to the column and does not require the wheel to be removed. A locksmith would have rekeyed the lock cylinder. The high beam switch is mounted of the left side of the column and is actuated by a 6 inch long rod. This does not require the wheel to come off.

Feb 24, 2010 | 1999 Chevrolet Camaro

1 Answer

How do i reprogram my ignition switch n my 92 camaro rs.i will not start ,brand new starter,ignition switch. new fuses.all the power comes on.


You can't. I just replaced mine on my 92 Camaro and it's a pain in the ***. You can only install the ignition switch one way, then you have to make sure that the rod coming off the tumbler (where your key goes) is in the right spot.

Nov 14, 2009 | 1989 Chevrolet Camaro

2 Answers

1994 Camaro multifunction lever wil not change


Try spraying some CRC into this switch make fix the problem

Jul 23, 2009 | 1994 Chevrolet Camaro

1 Answer

I have a 97 camaro rs it has power windows and they are both messed up the drivers side motor is good but off track so i can pull up or push it down with one hand easy.the passengers side motor is dead or...


it is much easier to replace the motors then to deal with having them off the tracks and chancing breaking the windows when you go over a bump you can usually find the window motors on ebay for under $20

Apr 29, 2009 | 1997 Chevrolet Camaro

1 Answer

Overheating prob in chevy camaro z28 97


Check for obstruction in front of radiator/condenser that would cause loss of airflow through the core.Sometimes these cores get clogged with bugs or debris and airflow is deminished. The reason for overheat with A/C on is that the condenser adds to the heat in front of the radiator and if there is not enough airflow then the engine also runs hot because radiator can not be cooled sufficiently.
hope this helps

Apr 20, 2009 | 1993 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...