Question about 1999 Cadillac DeVille
I have a Haynes manual but with 4 relay panels and 6 per panel, which relay to replace?
Check for blown fuse for cigar lighter, remove any debris from lighter sockets. reverse lamps possible broken wire at l/h trunk hinge
Posted on Jan 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Not sure what you mean by 8-6-4 but this will help you. Pick the correct one for your application:
GM (Cadillac) 250 (4.1L) V8 .GM (Cadillac) 273 (4.5L) V8 .GM (Oldsmobile) 307 (5.0L) V8 .GM (Oldsmobile) 350 (5.7L) V8 w/EFI.Engine firing order: 1-8-4-3-6-5-7-2 .Distributor rotation: counterclockwise
GM (Cadillac) 368, 425, 472, 500 V8.Engine firing order: 1-5-6-3-4-2-7-8.Distributor rotation: clockwise
GM (Cadillac) 429 V8.Engine firing order: 1-8-7-2-6-5-4-3.Distributor rotation: clockwise
Posted on Oct 17, 2009
You can either go to google ebooks and find a free repair manual for your car, or go to autozone.com and register for free online repair manual.
You will need to remove all screws, then remove window and lock controls, then take large flat-tipped screwdriver and gently pry next to all the plastic studs that hold on panel to door. Once all panel is pried up and loose, just pull straight up and lift off. Then remove plastic without ripping the middle, (You can stick back on later) then you will have access to window motor. It is a 12 volt motor.
Posted on Oct 06, 2009
Testimonial: "Thanks for getting back so fast. After doing a little more research I've determined it's beyond my capabilities. Have a great day. Steve"
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Have you checked for voltage at the lighter? have you checked the ground wire. Look for broken or frayed wires.
Posted on Sep 19, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Feb 05, 2012 | 2008 Chevrolet Silverado 2500HD 2WD
Jul 14, 2008 | Chrysler Voyager Cars & Trucks
Oct 10, 2011 | 2000 Pontiac Grand Am GT
Mar 18, 2011 | 2003 Chevrolet Suburban 1500
Jul 28, 2010 | 1997 Dodge Stratus
Jul 07, 2009 | 1999 Volkswagen GTI
May 20, 2009 | 1997 Volkswagen Jetta
Apr 18, 2009 | 1991 Volkswagen Jetta
Apr 10, 2009 | 1995 Volkswagen Jetta
Jan 01, 2009 | 1988 Chevrolet S-10
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: