Question about 2002 Hyundai XG350

Open Question

Transmission wont engage when putting it in drive for up to 20 second and so metimes not at all

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My chevrolet transport is no longer engaging gears, when i put it on drive or reverse gear, it doesnt engage


check fluid level in transmission . run the fault codes and look for a faulty TCM or torque converter clutch solenoid / servo

Mar 20, 2014 | 1999 Chevrolet Venture

1 Answer

Transmission doesn't engage


Try changing the fluid and filter. Use the approved Mopar fluid and not the cheap stuff.

Feb 17, 2014 | Cars & Trucks

1 Answer

Vehicle wont engage in drive but can shift from 1st to second to drive and od off light is flashing on my 2002 ford escape 3.0 4wd


The only reason the lower gears are working is because they engage a separate clutch to assist in engine breaking on downhill grades. You have most likely cracked a forward piston in the transmission, and the transmission may need to be overhauled or replaced.

Aug 15, 2010 | Ford Escape Cars & Trucks

2 Answers

Transmission Slipping


sounds like you need AAMCO free estaments from coast to coast as it sounds like you have cooked your trans and will soon need another

Mar 18, 2010 | 2006 Nissan Maxima

1 Answer

How to shift into 4 LO in 2004 jeep grand cherokee


The correct procedure should be described in detail in your owner/operation manual.
For a 2004, 90 % sure that if it's a quadra trac you have to immobilize the vehicule, put your transmission shifter to neutral keeping foot on the brake obviously, engage the low on transfer case pulling the transfer case shifter, engage the transmission to drive
If it's a select track, normally you have to keep the vehicule moving very slowly (2 mph), move the transmission shifter to neutral, push the transfer case shifter to the right and pull it firmly. Once transfer case engaged, put back the transmission shifter to drive.
It could take few seconds to engage and disengage depending on the temperature and road condition. Do not try it on dry surface (preferable on mud, snow and wet surface). Drive at low speed because you will feel that it's very low geared.
By the way, follow the reverse process to reestablish normal mode

Hope it will help
Dan

Dec 21, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Every thing works fine in drive but when i put it in reverse it..


Your transmission obviously has a problem. Take it to a transmission repairer.

Oct 11, 2009 | 1992 Honda Accord

1 Answer

Transmission doesnt seem to engage, no drive indicator on column


I would take it back to the person that rebuilt it and make them fix it again or get your money back if you can

Jan 20, 2009 | 2000 Chevrolet Blazer

1 Answer

Car wont drive


when it won't move can you reve the engine? and if so does it try to engage into any gears at all?

Aug 01, 2008 | 2005 Nissan Maxima

Not finding what you are looking for?
2002 Hyundai XG350 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...