Question about Isuzu Rodeo

1 Answer

I have 2003 RA Holden Rodeo 3.0 ltr T/Diesel. The 2 front wheels don't seem to be engaging when i put it into 4wd (high or low range). I can hear the high and low range click in when i press the buttons and i'm getting low range out of the back 2 wheels but the 4wd dash lights just keep flashing and the front 2 wheels don't engage

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 293 Answers

Does yours have AUTO hubs, there are some luxory models have auto hubs, these rely on difference in drive on the axles,(wheel spin) others have manual locking hubs, these actually need to be engaged manually, these require you to twist the centre of the hub to engage and disengage the front hubs, these sometimes require you to reverse to disengage properly, Rodeo had both depending on model. Happy New Year

Posted on Dec 31, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1999 isuzu rodeo 4wd not woking

I had this happen to a 1999 4x4 LS and my sisters boyfriend mentioned to periodically turn 4x4 on/off at least once a month.
What I did was go down a stretch of road slowly and attempt to turn it on/off till it became unstuck.
Drove around 10 miles on a road that was hardly used...to get the stupid light to quit flashing I had to put it in park and try to creep forward ---while using off settiing or put in park then reverse...while using the off -setting on 4x4. My patience paid off. They get sticky...you must be cautious... because there is a way to cause vibration and then it won't start...some deadman feature that I experienced once and the LWD must have slipped in a little and I had to look at everything.
Mine is an Automatic with the shift on the floor...that can get sticky too.

Good luck and hope this helps...mine had lots of growing pains but I get 23 mpg and it runs/idles better and the only gremlin left is some short in the dash which leaves the lights D/3 (one or both on)for the shift indicator on:)

Posted on Oct 12, 2008

  • 4 Answers

SOURCE: my 2000 blazer won,t select 4wd hi/low or auto

there is a vacuum solonoid on the firewall in the middle with 2 vac lines and a 2 wire plug
thats ur problem
push the button and smack it with the handle of a screwdriver should work

Posted on Feb 07, 2009

MNfisherman
  • 11896 Answers

SOURCE: I have a 95 explorer xlt 4.0L V6. The 4wd does not

the front axle bearing could be shot. This is common. Also the hubs may not be locking which is even more common

Posted on Sep 11, 2009

  • 6 Answers

SOURCE: 2001 s10 4wd dosen't engage

Check actuator under battery to see if it moves when you put in 4 wheel drive.This has an arm on it which pulls a cable in on front diff.sometimes the actuator boot will tear as it is like a rubber boot.

Posted on Jan 18, 2010

emissionwiz
  • 76691 Answers

SOURCE: 2003 holden rodeo wont engage 4wd

Defective transfer case actuator or jammed transfer case..

Posted on Feb 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a vacuum pump be the cause of an oil leak on a diesel Holden rodeo?


it can be but to know what is the real problem and to locate the problem you can take help from the repair manual but if you do not have the manual then go to the given link from where you will get easily http://toolsnyou.com/

Sep 07, 2017 | Holden Cars & Trucks

1 Answer

Can a petrol gear box go into a diesel engine 4wd Holden rodeo RA


if manual transmission , no problem
if automatic transmission , torque converter different

Jul 10, 2017 | Holden Cars & Trucks

1 Answer

Engaging 4wd


Hi i have holden rodeo 2003 petrol, it will engage high 4wd and back to nutrel but wont make any noise of engagement when i put it in low 4wd

Jan 05, 2014 | Dodge Cars & Trucks

1 Answer

I am currently having the problem of not hearing the motor actuator on transfer case making any noise when i push in the 4x4 button on isuzu trooper 3.0.i am getting no 4 wheel drive and the light on dash...


On these issue,there are few solved help links for troubleshooting the issue easily.-------Click the link below:---No 4x4 light on dash? http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html
-----------4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes
http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html
------------2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing? http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html
----------4x4 front differential will not engage the axle on ford? http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html
-------4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html
------------- Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html
----------Ford 4x4 front wheels will not engage? http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html
-------------These details will help.Thanks.

Nov 22, 2012 | Cars & Trucks

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

Torque settings for a holden rodeo 3.5 ra. Head


stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
front
5 2 4 8

Dec 03, 2009 | 2004 Isuzu Rodeo

3 Answers

Unleaded Fuel in a Diesel Engine


You can buy a suction hose small enought to get intothe tank at an auto parts store. you will have to remove the fuel from the tank. All of it and then replace fuel filter.

Sep 21, 2009 | 2003 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...