Question about Audi A6
Rev start play up and down before water go 90.i dont no what is the problem?
It sounds like engine temp sender falty or ecu falt, check sensor and plug conections
Posted on Dec 30, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i have a 2001 audi
In your case the turbocharger is responsible for engine losing power.
The car goes in "limp home" mode!!!
After scan the EDC-15P engine control unit with a VAG or KTS -BOSCH diagnosis tool you will find this: Fault code: P1557-Turbo Boost pressure control exceeded
1. Engine stopped and ignition switch off. Check all pneumatic connections and hoses between turbocharger actuator = pressure unit for boost-pressure control, boost-pressure control solenoid valve, vacuum reservoir, EGR control solenoid valve, intake-manifold flap solenoid valve, EGR valve with throttle - part of intake manifold. Also the vacuum connection between tandem pump and brake booster. If you find something wrong replace parts. If not go to step 2.
2. Extract the hose of the turbocharger actuator = pressure unit for boost-pressure control part of turbocharger. Instead of the original hose you must place another 1 meter long hose with the same inside diameter, and then you check to inspire yourself the air from the other one extremity of this hose. The mechanical connecting rod of the turbocharger actuator must have a smooth and whole motion. If you can do that with your mouth, then you must replace the boost-pressure control solenoid valve. If you can not reach this with your mouth, then you go to step 3.
3. This is the most difficult work. The problem is that the soot particles deposits inside the turbocharger plugging the variable nozzle geometry mechanism = adjustable vanes of the turbine. If the turbocharger actuator is not able to adjust the turbine vanes the charge air pressure increase too much and ECU (engine control unit) go in "limp mode" = engine protection software. As a result the "limp home" mode engine still running until you turn the engine off (ignition switch off) and back on when the "limp mode" is deactivated, but the fault still remain in ECU memory!
4. You must be able to extract the turbo from the engine and then to disassemble the turbocharger, clean inside adjustable vanes mechanism and refit all.
Posted on Apr 20, 2011
If somebody replaced the turbocharger with a new one, you must check up all command vacuum lines, the entire air intake system (air pressure pipes, intercooler, connections, EGR - throttle vane, ...), and also turbocharger and EGR command solenoid valves (three pieces). Could be also MAF sensor defective!
Here you have the vacuum air pipes connection picture for Audi A4 1.9 TDI (AJM engine):
Please Rate my Response! Thanks!
Posted on Sep 02, 2009
Tips for a great answer:
May 28, 2017 | Audi A5 Cars & Trucks
Jun 30, 2012 | 2008 Audi A3 S Line Hatchback
Jan 16, 2011 | 2002 Audi A4
Jan 15, 2010 | Audi A3 Cars & Trucks
443 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: