Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10
Posted on Jan 14, 2009
Tighten in several passes to 44 foot pounds.
I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.
Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.
Tightening torque pattern is as follows:
1.The Drivers side of the engine is the Left side.
From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.
The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.
Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)
Posted on Jul 25, 2009
Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees
Posted on Jul 26, 2009
hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9
in that order hope this helps
Posted on May 10, 2010
Tips for a great answer:
Oct 07, 2015 | Cars & Trucks
Sep 01, 2013 | Cars & Trucks
Nov 15, 2012 | 2000 Volvo S40
Mar 25, 2012 | Volvo C70 Cars & Trucks
Fig. Cylinder head torque sequence-5-cylinder engines
Install the lower cylinder head with a new gasket. Tighten the bolts in sequence as follows:
Jul 16, 2011 | 1999 Volvo S70
May 10, 2011 | Saab 9000 Cars & Trucks
Sep 17, 2010 | 1995 Land Rover Discovery
Apr 05, 2010 | 1989 Volvo 740
Nov 24, 2009 | 2001 Kia Sportage
Dec 14, 2017 | Mini Cars & Trucks
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: