Question about 2008 Kia Carens 1.8

Open Question

U0100 lost communication with engine control module or poertrain control

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code U0155 for 06 Ford f350


Gas or diesel ?
U0155 - Lost Communication With Instrument Panel Cluster Control Module Description: Missing message concerns are logged by a module upon failure to receive a message from another module within a defined retry period. Possible Causes:
  • Open VPWR circuit to the sending module
  • Open GND circuit to the sending module
  • Open network circuits to the sending module
Diagnostic Aids: Carry out the diagnostics for the associated network module. Application Key On Engine Off Key On Engine Running Continuous Memory All Refer to the Workshop Manual Section 413-01, Instrument Cluster. Do you have a scan tool that can talk to the I/P cluster ?
  • The instrument cluster does not respond to the diagnostic tool
  • Circuit or connection in the controller area network (CAN)
  • Instrument cluster
  • Go To Pinpoint Test H .

May 12, 2015 | Ford Cars & Trucks

3 Answers

What do these codes U0100, U0155, U0101 and P2187 mean for my mazda?


U0100 - Lost Communication with ECM/PCM "A"
U0155 - Lost Communication with Instrument Panel Cluster (IPC) Control Module
U0101 - Lost Communication with TCM
All of them are Geniric Codes 4 Mazda, I would say who ever was working on the car last, posobly forgot or missted 1 or 2 connection
plugs along the way near the last repairs. So just trace yr last steps 2 see if ther any unpluged connectors, cos looks like they all are part of same chane in that line.
P2187 - Sys To Lean at the idle Bank 1
Hope that helpes you. Good luck.
Tony D:-)

Aug 03, 2014 | 2004 Mazda 6

1 Answer

Toyota codes u0100 and u0101


U0100 means lost of communication with ECM/PCM
U0101 means lost of communication with TCM

Feb 24, 2014 | 2007 Toyota Camry

1 Answer

Toyota vx 200series code u0100


that is a very serious comm problem (Im sad for you, scary code)
reset it and see if it comes back other sysptoms, low battery
just finished jumper cable jump starts, or other odd battery issues???
short answer: take it to Toyota.
long:
U1100 is seatbelt controller
U1110
Lost Communication with Clearance Sonar Module i cant find much on U0100, are you very sure that is it?
DTC U0100 Lost Communication with Engine Control Module (ECM)

1: check all fuses. using and ohm meter (restance low range) for 0 ohms.
2: check battery voltage running engine and not.
12.6v key off, 13.3 to 15v running, if not charge system failure.
3: pull battery minus lug for 1hr. and put back, keep in mind you can lose radio codes. or dead radio for lack of radio pw code.

4: re-seat all CAN buss modules in car, 1 by 1one battery minus pulled.
PCM, BCM , all off them. reseat means pull connector to it and put it back.
It might just be a random glitch, that all comms see, all the time on all networks. Unknown, glitch. (CRC failure)

Jan 31, 2014 | 2004 Toyota Land Cruiser

1 Answer

Dtc u0100


did you scan the PCM? with a scan tool and then report all errors?
big fail if not.
U0100 - Lost Communication With Engine Control Module

Jan 04, 2014 | 2006 Jeep Grand Cherokee

1 Answer

2006 VW Jetta code U0100


This problem is with ecu / ecm= engine control computer. These are a common and horrible problem on vw's, particularly on tdi's. The signs in a tdi are when car dash lights come on, but no glow plug light,trans gear lights flash, but car still tries to crank. And hopefully ecu has enough power to out out code u0100= no communication with ecu. Unfortunately the ecu will need to be replacd. The ecu is located under the hood, near and under the wipers. Used ecu with same codes run $50-200. New $1000. If get used one make sure has a return policy. codes must match production quarterly year.

Apr 14, 2013 | 2006 Volkswagen Jetta

1 Answer

I had my 2004 Mazda Rx8 get an Engine Diagonistic@ Advance Auto & I got this code which I cannot decipher U0100-lost comm. with Engine control/Power Train Engine control Mod A.Could yiu please explain...


Codes that begin with the letter U are always communication fault codes between modules in a CAN system. They are basically to be ignored unless a problem is occuring. This is because all of the control modules in your car ( and there are a bunch of them ) are all communicating to each other and sending information between each other on one set of wires called a "twisted pair" Due to the high volume of infomation being sent and received there is the invevitable time when a message will be sent from one module to another and it is lost or not responded to in a timely manner (meaning in milliseconds) When this occurs then a U0100 or other comm fault code is stored.

May 05, 2011 | 2004 Mazda RX-8

1 Answer

Im looking for the definition to code U0100.


U0100 - Lost Communication With Engine Control Module (ECM)

Jan 30, 2011 | Chevrolet Aveo Cars & Trucks

Not finding what you are looking for?
2008 Kia Carens 1.8 Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...