- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You could select the 12 Hour clock mode instead of 24 hour as it may be set at now.
Also it needs to be confirmed if the audio system fitted to your vehicle supports 12 hour clock. Please check the two documents below after turning to the section on Clock setting. The menus to set this could vary depending on which audio system you have.
You may have this
posted in the wrong product category. Please select another category
appropriate to the problem and re-post the problem so the correct
expert will see and respond to the question.. This is for
car and truck problems related to factory installed systems not add
on aftermarket systems. This post
can't be removed or moved, please re-post the question in the correct
product category. Thanks
Clock Setting Procedure (digital clock page 242 of your owners manual) 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side Tune/ Audio control. 3. After the hours are adjusted, press the right side Tune/Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side Tune/Audio control. 5. To exit, press any button/knob or wait 5 seconds.
SETTING THE ANALOG CLOCK (page 238 of your owners manual) To set the analog clock at the top center of the instrument panel, press and hold the button until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.
Sometimes if you depress both the Hr/Min buttons this toggles the time 12hr/24hr, Im not positive on this one..You can always check with a dealer or look in the owners manual if you have one. Or just learn military time..lol..
Actully, you need to press and HOLD the "mode" button for a few seconds. It will then display the setting for the speed sensative volume. Press the mode button agian and it will switch to "set clock". You can select a 12 hour (standard) or 24 hour (military) clock. You then use the key pad to enter the time and the AM or PM setting .