Question about Cars & Trucks

1 Answer

No spark to my plugs

Changed coil steal no spark

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Cars & Trucks Expert
  • 161 Answers

Many cars have a camshaft and a crankshaft position sensor. This gives the computer information on when to deliver spark.

Posted on Dec 30, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting a rapid misfire in cylinder 5 changed spark plugs ,cleared the code came back on the day later ???


Hi Jason, Sounds like you have a coil pack and one of your coils is faulty. To check which coil is faulty just pull a spark plug lead off a spark plug and plug the spark plug lead onto a SPARE spark plug, Now earth it to the CLEAN motor or body (make sure the spark plug is touching metal) Start the motor, it's going to run ROUGHER than usual but you'll see if that spark plug is sparking... If it sparks then that coil is good. Turn the motor off and replace the spark plug lead back on to the original spark plug. Repeat with the next spark plug lead and so on until you start your car and the spark plug doesn't spark, THAT'S YOUR FAULTY COIL...

Apr 14, 2016 | Cars & Trucks

1 Answer

I have a 1999 Nissan Sentra 1.6L. Car runs well


Check the ignition coils and spark plugs. P0304 is a misfire code.

Oct 12, 2014 | Cars & Trucks

1 Answer

Coil not providing spark


Borrow, beg, steal, rent or otherwise obtain a plug in computer tester. Plug into the special plug under the dash near the steering wheel. Turn on the ignition key. See what code is showing. Be guided accordingly. They will do this free at most auto parts store. You can buy a good unit from Amazon for about $70. It comes in handy and is a lot cheaper than putting on parts you do not need. It could be several things not letting it get spark. Keep the tester for future use or sell if for a profit on Craigslist.

Apr 02, 2014 | 2003 Chevrolet Cavalier

1 Answer

Not getting spark


check the coil first with a spark plug tester. then go to the leads at your spark plugs if no spark at the coil change it. .if spark found at the coil but not at the leads at the spark plug. then check the distributor cap and the rotor arm clean the contacts then check the plugs smell them of fuel if that is found change the spark plugs.

Dec 21, 2013 | Cars & Trucks

1 Answer

I got code PO 305 on a 2002 Mercury Grand Marquis, what is the spark plug wire part called, is it #5 coil, and should I replace the coil and spark plug and what should the spark plug be gapped at? Thank...


I got code PO 305 on a 2002 Mercury Grand Marquis, what is the spark plug wire part called
This will have a direct coil over ignition with a coil over each spark plug. The coil is the electrical part over the spark plug. The coil also has a rubber part that is called the boot or spark plug boot. The boots can be purchased separately but the coils will come with new boots.

is it #5 coil,

Have you checked to see if there is any spark coming out of the number 5 coil?



and should I replace the coil and spark plug and what should the spark plug be gapped at?

When was the last time the spark plugs where changed? It may be due for all the spark plugs to be changed. The spark plug gap is usually listed on the emissions sticker under the hood. It should be .050 - .056 or very close to that.

May 16, 2011 | 2002 Mercury Grand Marquis

1 Answer

Where are the spark plugs in Ford KA 1999 and how do i change them


IF YOU HAVE THE EI IGNITION SYSTEM.YOUR SPARK PLUGS IS UNDER EACH INDIVIDUAL COIL.DISCONNECT COIL ELECTRICAL CONNECTOR.THEN REMOVE COIL RETAINING BOLT.THEN REMOVE OFF SPARK PLUG.THEN REPLACE SPARK PLUG.YOU HAVE 8 COILS TO REMOVE BEFORE REPLACING SPARK PLUGS.

Feb 16, 2011 | 1999 Ford Explorer

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

3 Answers

No fuel or spark on my 89 chevy k5 blazer


change coil pickup which is in the bottom of the distrubuter

Feb 13, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

Change spark plugs


My 2004 Verona had factory installed "NGK BKUR6ETB" regular spark plugs which I replaced at 30,000 miles. The 2005 model year is supposed to have Iridium spark plugs. To replace the spark plugs: 1. Remove plastic top engine cover. 5 nuts 10mm socket. 2. Unplug connector from each ignition coil. qty 6. 3. remove 2 hold down bolts per ignition coil. 10mm socket. 4. remove ignition coil, lifting straight up. 5. Spark plug is now accessible, use deep well 5/8 spark plug socket to remove.

May 15, 2008 | 2004 Suzuki Verona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...