Question about 2003 Ford Windstar

Open Question

Head bolt torque for 1999 bmw 740i - 2003 Ford Windstar

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: Head bolt torque specs needed for 96 tbird 3.8

Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:

  1. 20 Nm (15 lb-ft).
  1. 40 Nm (30 lb-ft).
  1. 50 Nm (37 lb-ft)
Loosen retaining bolts one at a time two to three revolutions and retighten as follows:

Long bolts:
  • Tighten to 40-50 Nm (30-37 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Short Bolts:
  • Tighten to 20-30 Nm (15-22 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Here is a pic of the sequence
http://i253.photobucket.com/albums/hh43/chuck943/Headboltsequence38L.gif

Posted on Mar 19, 2009

Ad
darrencasey0
  • 1 Answer

SOURCE: head bolt torque for a 1996 ford ranger 2.3liter

it is in the haynes repair manuel and chad is right

Posted on Apr 05, 2009

  • 207 Answers

SOURCE: Head gasket torque specs

Here you go, I hope this is what you were looking for:

For 1987-94 models, the cylinder head bolts are tightened in 3 progressive steps. Tighten them in the proper sequence as follows:
Step 1: 50-55 ft. lbs. (68-75 Nm) Step 2: 60-65 ft. lbs. (81-88 Nm) Step 3: 70-85 ft. lbs. (95-115 Nm) Let me know if I can assist you with anything else.

Posted on Apr 30, 2009

polarcycle
  • 1392 Answers

SOURCE: head bolt torque spec

Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Posted on Aug 16, 2009

tburtk
  • 158 Answers

SOURCE: torque on 3.0 ford taurus head bolts

40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Head bolt torque spec 05 bmw 4.4l


  1. Cylinder Head - AutoZone

    www.autozone.com/.../BMW-X5...05/.../Cylinder-Head/_/P-09...

    AutoZoneBMW X5 2000-05 .... Cylinder head bolt tightening sequence-4.4L & 4.6L engines. To install: ... Torque the bolts in thesequence illustrated in 3 steps as follows:.

Oct 17, 2014 | Cars & Trucks

1 Answer

Head bolt torque spec 05 bmw x5 4.4l


  1. Cylinder Head - AutoZone

    www.autozone.com/.../BMW-X5...05/.../Cylinder-Head/_/P-09...

    AutoZoneBMW X5 2000-05 .... Cylinder head bolt tightening sequence-4.4L & 4.6L engines. To install: ... Torque the bolts in thesequence illustrated in 3 steps as follows:.

Oct 17, 2014 | Cars & Trucks

1 Answer

What is the head bolt torque sequence on a 1998 BMW Z3 Roadster 2.8 liter?


Its usually from the center out in the next most opposite bolt (star) sequence. ie. if its a 14 bolt head 1-7 top, 8-14 both from front it would be like 4-11-3-12-5-10-6-9-2-13-6-8-1-14-7. you just want to avoid tightening a bolt outside a non torqued bolt to prevent head or gasket damage. torque specs are done in degrees, ie 44 ft/lbs, then run it 15 min then tighten another 33 degrees, then run it another 10 minutes and final torque another 25 degrees.

Aug 18, 2013 | BMW Cars & Trucks

1 Answer

Head bolt sequence and torque values on a 1999 Chevy 3.1L engine


if the 8th number om your VIN is a "J" then this is the correct prossess 3.1LTorque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 37 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.

if the 8th number on your VIN is a "M" then this is the correct prossess 3.8LTorque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 37 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.

Oct 12, 2011 | 1999 Chevrolet Malibu

1 Answer

Small water leak from the rear of cyl. head on bmw 318 i 1999 can you get to the problem without removing the cyl. head


U already have a BUSTED head gasket and maybe a WARPED head. The solution would be removal of the head, replacing the gasket and shaving the cylinder head! But if u insist, try RE-TORQUEiNG/TiGHTENiNG the head bolts w/ additional ft/lbs until the desired compression to fix the LEAK. The other one is BUYiNG an additive coolalnt SEALER, have used this ones for emergency, but it will only last for a couple of weeks, and will somehow block the RADiATOR FiNS! At the age of ur car, it needs a NEW GASKET, so that it last for more years! Hope that might help u out!

Nov 17, 2010 | 1999 BMW 318 ti

1 Answer

Head bolt torques spec


3.8L V6

cylinder head bolt torque

step 1 37 ft lbs.

step 2 an additional 130 degrees

step 3 4 center bolts an additional 30 degrees

Jul 07, 2010 | 1999 Buick LeSabre

3 Answers

Torque settings for cylinder head nissan sentra


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jul 18, 2009 | 1999 Nissan Sentra

1 Answer

What are the torque specs for the head bolts for a 1999 sportage


hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

Jan 24, 2009 | 1999 Kia Sportage

1 Answer

Tightening head


New Headbolts are recommended

Long bolts are torqued to 46'lbs + 90 degrees.

Short bolts are torqued 43'lbs + 90 degrees.

Start in the center, and work to the edges, torquing the bolts in two stages.

Rockers are torqued to 22'lbs.

Dec 21, 2008 | 1999 Chevrolet Cavalier

1 Answer

Head bolt touqe settings


Tightening torques

Do not reuse the bolts as they may be stretched.

Cylinder head to engine block
Stage 1: 32Ft-lbs
Stage 2: +90degrees
Stage 3: +90degrees

Cylinder head to lower timing
chain cover: 89in-lbs

Nov 27, 2008 | 1992 BMW 3 Series

Not finding what you are looking for?
2003 Ford Windstar Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...